Glass from the melter flows gently over a refractory spout on to the mirror-like surface of molten tin, starting at 1,100°C and leaving the float bath as a solid ribbon at 600°C.

Bnc mount lensadapter

Despite the tranquillity with which float glass is formed, considerable stresses are developed in the ribbon as it cools.

Occasionally a bubble is not removed during refining, a sand grain refuses to melt, a tremor in the tin puts ripples into the glass ribbon. Automated on-line inspection does two things. It reveals process faults upstream that can be corrected. And it enables computers downstream to steer cutters round flaws. Flaws imply wastage; while customers press constantly for greater perfection. Inspection technology now allows more than 100 million measurements a second to be made across the ribbon, locating flaws the unaided eye would be unable to see. The data drives ‘intelligent’ cutters, further improving product quality to the customer.

Too much stress and the glass will break beneath the cutter. To relieve these stresses, the ribbon undergoes heat-treatment in a long furnace known as a lehr. Temperatures are closely controlled both along and across the ribbon. Pilkington has developed technology which automatically feeds back stress levels in the glass to control the temperatures in the lehr.

We have detected that JavaScript is not enabled in your browser. To use this site and to give your consent to the use of cookies we require the use of JavaScript.

Float glass is sold by the square metre. Computers translate customers’ requirements into patterns of cuts designed to minimise wastage. Increasingly, electronic systems integrate the operation of manufacturing plants with the order book.

By clicking ‘Accept All’ you consent to the use of cookies for non-essential functions and the related processing of personal data. Alternatively you can reject non-essential cookies by clicking ‘Essential Only’. You can adjust your preferences at any time by visiting our Cookie Policy and access the settings on that page.

Bestbnc mount lens

Watch the magic of this science-based process begins to unfold, in a series of stages on a float line that may be nearly half a kilometre long. Raw materials enter at one end. From the other, plates of glass emerge, cut precisely to specification, at rates as high as 6,000 tonnes a week. In between lie six high integrated stages...

Coatings that make profound changes in optical properties can be applied by advanced high temperature technology to the cooling ribbon of glass.

Bnc mount lensamazon

A410, An Le Technology Innovation Park, 18 Jia An Road Bao An 40 District, Shenzhen China 518101 TEL: 86-755-82809586 Email: sales@lapsun.com

* Delivery Time. We need 1-2 days to process your order before shipping.There are two shipping methoed. Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.Slow Delivery: The delivery time for US, European countries the delivery will take 10-15 days. * Tracking information. After we ship package, customer receive automatic email with tracking details. * Lost Package Policy. If a package did not arrive in 4 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.

JavaScript is enabled as default in all modern browsers, to re-enable it please consult the help section in your browser or ask your system administrator to have this enabled.

The float process is renowned for making perfectly flat, flaw-free glass. But to ensure the highest quality, inspection takes place at every stage.

The principle of float glass is unchanged from the 1950s. But the product has changed dramatically: from a single equilibrium thickness of 6.8 mm to a range from sub-millimetre to 25 mm; from a ribbon frequently marred by inclusions, bubbles and striations to almost optical perfection. Float delivers what is known as fire finish, the lustre of new chinaware.

On-line chemical vapour deposition (CVD) of coatings is the most significant advance in the float process since it was invented. CVD can be used to lay down a variety of coatings, less than a micron thick, to reflect visible and infrared wavelengths, for instance. Multiple coatings can be deposited in the few seconds available as the glass ribbon flows beneath the coaters. Further development of the CVD process may well replace changes in composition as the principal way of varying the optical properties of float glass.

Float makes glass of near optical quality. Several processes – melting, refining, homogenising – take place simultaneously in the 2,000 tonnes of molten glass in the furnace. They occur in separate zones in a complex glass flow driven by high temperatures. It adds up to a continuous melting process, lasting as long as 50 hours, that delivers glass at 1,100°C, free from inclusions and bubbles, smoothly and continuously to the float bath. The melting process is key to glass quality; and compositions can be modified to change the properties of the finished product.

Fine-grained ingredients, closely controlled for quality, are mixed to make batch, which flows as a blanket on to molten glass at 1,500°C in the melter.