dof自由度

You can also change your depth of field based on your camera lens; this can get a little more tricky. The more you zoom, the more depth you will receive because it is also compressing your image and you will have more of a focus on your field rather than use a wide-angle lens. Using a wide-angle lens is great if you want a deeper depth of field and more in focus. The higher the focal length, the shallower your depth of field will be because it is compressing your image.

DOFsimulator

Future readers: please DO NOT attempt to recreate this duct-tape-engineered filter for your application. Making it exposes you to all sorts of dangers: flying shards of glass, mercury and its vapors, possibly harmful fluorescent coating of the broken glass tube, and barely noticeable strong UV radiation. My setup allowed me to stay safe and decently isolated. I'm not responsible if you disregard the warning.

Depth of field can give you as much or as little texture that you are looking for in an image as well; this comes in handy while shooting macro photography. You can see in this example just how much the background texture changes from 2.5 to 5.0.

I tried to search the internet but chances are slim. One of the options is to use Scott's color filters.One of the options is Scott's UG11 filter. I dont think you can get it under \$5 but the price is ~\$25. However in the case of bulk order you can get lower prices or if your application permit you can cut this into parts to decrease the price.

Depth of focus

A deeper depth of field is common when photographing a landscape and architecture. When shooting a landscape, you will want to have your foreground, middle ground, and background crisp and in focus. The higher your aperture is, the slower your shutter speed will be to get a correct exposure so always be prepared with a tripod while shooting landscapes in lower light to avoid any camera shake.

My question is, is there a dirt-cheap material that I can use in my project to block all/nearly all the visible light? I don't mind the filter cutting off a lot of the UV too, as I can increase power to the LED quite liberally. I can accept any DIY solutions and have access to a decently equipped workshop. Proper UV-pass camera filters seem far beyond my budget.

Shallow depth of field

Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Depth of field (DOF) is a crucial concept in photography on a technique and artistic scale. Since photography is a two-dimensional art form, depth of field gives us the ability to feel as though we are stepping into an image. Your depth of field is also known as your focus range. The “field” is the subject you are photographing, and the depth is the distance between the nearest and furthest objects that are sharp and in focus.

The easiest exercise to demonstrate aperture and how it affects your depth of field is to set your camera on a tripod and find a subject that shows a foreground, middle ground, and background. A tripod is not only important in this because you want to have a continuous shot but because your shutter speed is going to start slowing down to compensate for the light as your DOF goes up. Set your camera to AV which is aperture priority. This will let you change the aperture how you please and lets the camera choose the shutter speed and ISO for your best lighting.

Depth of field

In the old days of photography, some of the film on the ends of the rolls would expose to darken the negative material. If you found one of those stretches that no visible light would pass through, you could cut it and use it as UV-only bandpass filters of a sort. Not as good as a professional grade camera bandpass, but definitely a cheap-diy

depth of field中文

After a few days' experiments, I found a don't-try-this-at-home solution: I purchased a straight UV CFL for less than 2USD and broke it, then cut the glass shards and used them as my filter. It allows an amount of deep violet visible light to pass through, yet it's much better compared to the bright white glow of the unfiltered LED.

I'm currently working on a project with 1W 365nm UV LEDs, similar to this item. I'm using it to make some markers light up in a dark room. The problem is that aside of shining with the proper UV-A and creating expected lightning effects, the LED gives off a noticeable amount of visible light, which is not acceptable.

Depth of field calculator

This is my first Stack Exchange question, so if there are any issues with it I'm eager to correct them once notified. Thanks!

Depth of field is only one piece of the exposure triangle but, as you can see, it offers a lot of tools to make your photography stand out.

Shallow depth of field is very common in portrait photography, wildlife photography, sports photography, and detail shots. Portraits are best with a shallow depth of field because it blocks out any distractions which can also apply to wildlife photography. Another good reason to use a low aperture is that it will add more light in. This will give you the ability to use a faster shutter speed to catch candid moments and a great tool to have for fast sports photography.

What is DoFin photography

Other option is to buy the phosphors yourself and coat it on the glass there are several references here. For example following phosphors will work for you. LiYF4:Pr 218 nm, YPO4:Pr 232 nm, KYF4:Pr 235 nm. However I must warn you that these phosphors may be highly toxic and reactive. Please read MSDS before using them.

You might often hear of a “shallow” or “deep” depth of field. A shallow DOF has less focus around your main subject, and a deep depth of field shows more focus around your main subject. The aperture easily controls the depth of field. Aperture is made up of f-numbers (f/5.0, f/16, f/22) and is also known as f-stops. The higher the f-stop number, the deeper your depth of field will be and the smaller the f-stop number is, the more shallow your depth of field will be. Aperture also has an effect on your exposure. The numbers represent the lens opening diameter size, and that will also determine how much light passes into the camera. The range starts at a larger diameter size and works down. The smaller the f-stop, the larger the diameter of the lens opening, this also adds more light. The larger the f-stop, the smaller the diameter and the less light will pass through.

I found it quite surprising that rubbing the fluorescent coating off the inner side of the tube made it far less effective in filtering away the visible light - I was expecting the black (dark violet actually) enamel on the glass to do the trick. Still, it works.