NorcoOpticgen 3

NPN open-collector 24 V, 100 mA max.*2 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Norcooptic specs

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]

NorcoOpticC2 review

Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3

*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C

NorcoOpticC3 weight

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*3

KEYENCE supports customers from the selection process to line operations with on-site operating instructions and after-sales support.

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]

SpecsOptical Pacific Mall

Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,28 mA max.)*3

NorcoOptic

PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

NPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

NorcoOpticC1

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable： 0.1 ms to 9,999 ms, Maximum error against the setting value： ±10% max.

*1 2*2 Total current of two outputs should be less than 100 mA.*3 Only available on certain models.*4 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*5 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C

NorcoOpticC2 weight

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

The YAG laser safety glasses have a polycarbonate green lens filter that provides laser protection. These laser glasses have visible light transmission of 54%. In addition, the YAG laser safety glasses have ANSI Z87+ and ANSI Z136.1 safety standards and CE certified lens. These laser safety glasses 33 is a durable and lightweight fitover frame. Made of high-quality plastic, the 33 laser safety glasses feature adjustable temples and integrated side shields. These Phillips Safety laser safety glasses are available in black.

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*5

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable： 0.1 ms to 9,999 ms, Maximum error against the setting value： ±10% max.

Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*4

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C*5 4

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable： 0.1 ms to 9,999 ms, Maximum error against the setting value： ±10% max.

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*3