3MlightDiffuserFilm

The two films offered are white/black (adhesive on the black face) or black/white (adhesive on the white face), and can be installed to the inside face of the window or lightbox, or to the exterior face..

Light blockout films have a visible light transmission of less than 1%.  This means they effectively block out daylight or artificial light through the window or lightbox, and are totally opaque.

For out-of-office hours (8.00am-5.00pm GMT) or if you prefer to email you enquiry, please use the form below or email solutions@opaluxwindowfilms.com. We will attend to your enquiry at the first opportunity.

Diffusing light filmamazon

See below for our hot line (8.00am – 5.00pm), or send us an email enquiry, using the form provided, ideally giving us the location of the building and the approximate number of windows needing treatment.

Self adhesivelightDiffuserFilm

Micro-structured diffusers allow for LED color mixing, image hiding and varying levels of focus while maintaining high optical efficiency. WhiteOptics® offers three types of diffusion in our: Conical (DF), Split or Batwing (DFBW) and Elliptical (DFEP).  The goal for lighting designers is to get light to the area needed as efficiently as possible. WhiteOptics® offers a variety of optical products that can collimate, focus and guide light so designers have ultimate control on how to direct the light. Designs that maximize effectiveness in controlling light directionality allow for smaller and more efficient fixtures—saving on manufacturing costs, energy savings and enabling overall sustainability.

The light management window film is to be Black/White Light-Block Film. The film is to be installed to the exterior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. To prevent light seepage between the film edge and the window frame, seal the edges with white silicone edge-sealer. Opaluxwindowfilms.com

3m™ diffuserfilm3635

Some example uses would be to the windows of a museum display area to prevent any daylight coming through the glazing, or to the windows of a laboratory room or a theatre for the same effect.

To prevent light seepage between the film edge and the window frame it may be necessary to seal the edges with a black or white waterproof silicone mastic.

Where appropriate you will be connected to an Opalux approved dealer who can discuss your requirements, visit site if necessary, and provide costings for the film installation.

These Light Diffuser films can be used as specialist privacy films to give even more effective privacy than a standard privacy film.  They are white and come in two densities - 30% light transmission (denser) or 60% light transmission (less dense) Light Blockout Films.

Light Diffusing Filmfor windows

The light management window film is to be a 30% Light Diffuser Film. The film is to be installed to the interior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. opaluxwindowfilms.com

The light management window film is to be a 30% Light Diffuser Film. The film is to be installed to the interior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. opaluxwindowfilms.com

Light Diffuser Films are specially designed to offer better and more uniform light diffusion across a window or lightbox.  This means that they will diffuse the sun's rays, daylight or artificial light in a more effectively measured way than a standard privacy, solar control or tinted film.

The light management window film is to be White/Black Light-Block Film. The film is to be installed to the interior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. To prevent light seepage between the film edge and the window frame, seal the edges with white silicone edge-sealer. Opaluxwindowfilms.com

Light diffusing Filmfor LED

Diffusing light filmfor sale

The light management window film is to be Black/White Light-Block Film. The film is to be installed to the exterior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. To prevent light seepage between the film edge and the window frame, seal the edges with white silicone edge-sealer. Opaluxwindowfilms.com

The light management window film is to be White/Black Light-Block Film. The film is to be installed to the interior surface of the glass, and the unique product roll numbers used are to be registered in accordance with the manufacturer’s warranty procedure. To prevent light seepage between the film edge and the window frame, seal the edges with white silicone edge-sealer. Opaluxwindowfilms.com

Accurate selection of window films requires specialist knowledge, and it is recommended that specifiers contact the company at the specification stage (+44 (0)845 026 1125) or email solutions@opaluxwindowfilms.com

Exterior application may be necessary in certain circumstances from an access point of view or to prevent undue heating up of the window units from the sun, reducing any risk of unit failure through seal breakdown or thermal fracture.

They can also be used in conjunction with a heat or glare control film to improve its performance by effectively diffusing the light, in addition to the glare control already provided. However this will convert the film to a 24 hour privacy film and you will not be able to see out through the window. That is, they will convert the glazing from transparent to translucent.