Low outgassing adhesive for aerospace or electronic applications. Excellent transmission in UV range from 320nm to 2000nm.

Fast curing adhesive that will cure with UV or heat for tacking or bonding UV opaque materials.

Single component, UV curing adhesive used for temporary bonding of lenses to metal, glass or plastic polishing mounts.

The Spectronics Bench Mount Lamp style XX-15A is ideal for slow, even cures over a 4" wide by 15" long area..

Click here for PDF files of our Adhesive technical data sheets, REACH and RoHS certification

NorlandOptical Adhesive68

Fast curing adhesive for tacking or bonding. Excellent adhesion to glass or metal. Produces a hard, resilient bond.

The Splice Lamp is a table top lamp especially designed for curing the Norland UVC Optical Splice.

Norland's lowest viscosity UV curing adhesive used for bonding glass to glass or as a coating.

NorlandOptical Adhesive81

Low refractive index (1.46), very low viscosity, recommended for coating and bonding plastics and glass.

Recommended for sealing, chip bonding and applications that require wicking and thin sections. 8,000 cps. viscosity.

Low viscosity adhesive used for bonding polarized and polyester film, nylon, glass and other plastics.

Higher viscosity adhesive recommended for bonding plastic to plastic or glass to plastic.

Optical AdhesiveFilm

Single component conductive adhesive for preventing static buildup. Will cure tack free to a tough, resilient polymer when exposed to UV light and heat.

UV cured high viscosity, flexible optical adhesive for glass or plastics such as polycarbonate CAB or acrylic.

Norland Adhesives

Red colored heat curing adhesive for bonding, sealing or potting electronic components.

Blue colored adhesive used for many applications including wire tacking, chip capacitor bonding, coil termination, and tamper proofing. 200,000 cps. viscosity.

Green colored adhesive used for many applications including wire tacking, chip capacitor bonding, coil termination, and tamper proofing. 200,000 cps. viscosity.

Low outgassing,thixotropic adhesive used for HGA assembly, wire tacking, wire coating and other applications that are affected by outgassing. 200,000 cps. viscosity.

Thixotropic paste recommended for wire encapsulating, coil terminating and potting. 300,000 cps. viscosity.

The Multi-Pole LED UV Curing System emits a consistent and repeatable 2.5W/cm squared @ 365nm at each pole. The LED Multipole Sysytem is equivalent to a 10W/cm squared lamp system using a 4 pole liquid light guide.

Provides a strong bond to glass surfaces and has excellent clarity for light guides and other applications.

NorlandOptical Adhesive

Traydex LED UV/Visible light curing oven. More powerful to cure faster,  the Traydex 45 emits 13.9Mw/cm2 UV/Visible energy.

Low outgassing adhesive recommended for sealing, chip bonding and applications that require wicking and thin sections.

NorlandOptical Adhesive61

Low viscosity adhesive for bonding glass or plastics such as CAB polycarbonate or acrylic. Cures with UV or visible light.

UVadhesivefor glass

Norland's lowest viscosity UV/heat curing adhesive used for bonding glass to glass or as a coating.

Low outgassing, lower visocity adhesive recommended for wire coating, wire tacking, coil terminating. 55,000 cps. viscosity.

Norlandadhesive

High viscosity, thixotropic paste for wire tacking, chip bonding and coil terminating. 200,000 cps. viscosity.

Single component, UV curing adhesive used for temporary bonding of lenses to metal, glass or plastic polishing mounts. Stronger than NBA 107. NBA 108 is formulated to use when application uses large quantities of liquid or heavy grinding or polishing. Can be debonded with acetone.

Blue colored adhesive recommended for wire coating, wire tacking and coil terminating. 55,000 cps. viscosity.

Flexible adhesive for glass or plastics such as polycarbonate CAB or acrylic.

Screenable paste for bonding and sealing perimeter of liquid crystal displays.

NEA 121 with a red color for wire tacking, chip capacitor bonding, coil termination, bonding of head gimbal assemblies and tamper proofing adjustable components. 300 cps.viscosity.

The Opticure LED  200 is a battery operated, portable light source that uses a UV emitting LED.   The light emitting diode has a typical life of 50,000 hours and generates an output at full power of

Low viscosity adhesive for tacking, filling, sealing and tamper proofing precision components. 300 cps. viscosity.