PoESwitch

Industrial IEEE 802.3bt Gigabit Type 3 4PPoE Injector; EOT: -40°C ~ 75°C - This injector is designed for use with Axis Q6055-e MKii PTZ camera requiring High Power (up to 60 watts)

PoE injectorfor IP camera

A collimator is a device that limits the radiation output of an X-ray source.  Without a collimator, X-rays would escape which would flood the detector with radiation and prevent a clear image from being attained.  An X-ray collimator can be made from multiple materials including lead, tungsten, molybdenum, tin, bismuth, high density plastics and more. Vulcan can produce collimators in a variety of styles – including slit collimators, cone beam collimators, fan beam collimators and pin hole collimators – based on a customers’ needs.

Power over Ethernet (PoE) injectors are essential devices used to supply electrical power to network PoE devices over an Ethernet cable. While Ethernet cables are traditionally used for data transmission, the introduction of PoE technology allows them to also carry power to compatible network devices. This dual functionality significantly simplifies network infrastructure by combining power and data into a single cable, reducing the need for separate power supplies. A PoE injector is a standalone device that connects to a power source, such as a wall outlet, and an Ethernet switch or router. The PoE injector injects power into the Ethernet cable, allowing it to simultaneously transmit data and provide electrical power to a connected PoE-enabled device. For installations requiring simplicity and efficiency, a single-port PoE injector is often used to combine both power and data onto a single RJ45 Ethernet cable, effectively acting as a PoE adapter. PoE injectors often feature a sturdy metal enclosure for durability and protection, making them suitable for various environments. The main purpose of PoE injectors is to simplify the installation and deployment of network devices, particularly in scenarios where providing separate power sources for each device may be difficult or inconvenient. By eliminating the need for additional power cables and outlets, PoE reduces the complexity and cost of installation. PoE injectors typically adhere to the IEEE 802.3af, 802.3at, and 802.3bt standards, which define the specifications for delivering power over Ethernet. These standards specify the maximum PoE power budget that can be delivered, with IEEE 802.3af supporting up to 15.4 watts per port, 802.3at (also known as PoE+) supporting up to 30 watts per port, and 802.3bt (PoE++) supporting up to 90 watts per port. Common applications of PoE injectors include powering IP phones, wireless access points, IP cameras, network switches, and other network PoE devices. These injectors are crucial for network setups where traditional power outlets are unavailable or impractical. It's important to ensure that the devices being powered are compatible with PoE, as not all network devices support this technology by default. Understanding how a PoE injector works can greatly benefit anyone looking to streamline their network infrastructure and maximize efficiency.

PoE Injector48V

Industrial Gigabit Enhanced PoE++ Injector - 1*10/100/1000Base-T(X) with Enhanced PoE-PSE (H-Type)(100W/Port) and 1*10/100/1000Base-T(X), Booster Version, 9~55VDC; EOT: -40°C to 75°C

Power over ethernet poe injectoradapter

Industrial Gigabit PoE++ Injector - 1*10/100/1000Base-T(X) with PoE-PSE (90W/Port) and 1*10/100/1000Base-T(X); EOT: -40°C to 75°C

Industrial Gigabit Enhanced PoE++ Injector - 1*10/100/1000Base-T(X) with Enhanced PoE-PSE (100W/Port) and 1*10/100/1000Base-T(X), Booster Version, 9~55VDC; EOT: -40°C to 75°C

Vulcan can offer customers a few options for collimation into detectors. This is typically done to prevent cross talk between detector cards in a detector bank within a medical or security application. This allows the detector to be protected from scatter radiation and only detect the radiation striking the detector straight on. Detector collimation can be done in a variety of ways, but it is commonly done by standing thin tungsten or molybdenum foil on end in a sequence over the detectors to limit scatter.  Vulcan GMS can provide such tungsten or molybdenum foil and the related assemblies that hold these shielding plates. Vulcan can also offer other solutions in lead and plastic based on the specific need.

Power over ethernet poe injectorsetup

Industrial Gigabit PoE++ Injector - 1*10/100/1000Base-T(X) with PoE-PSE (90W/Port) and 1*10/100/1000Base-T(X), Booster Version, 9~55VDC; EOT: -40°C to 75°C

Industrial Gigabit Enhanced PoE++ Injector - 1*10/100/1000Base-T(X) with Enhanced PoE-PSE (100W/Port) and 1*10/100/1000Base-T(X); EOT: -40°C to 75°C