10mW 633nm Red HeNe Laser System - hene laser
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 8 ° × 8 ° rotational angle (θX × θY); closed frame; for 2" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
NewportKinematicMount
Compact, low-cost inertia drive principle (stick-slip). When at rest, the drive is self-locking, requires no current and generates no heat. It holds the position with maximum force.
KinematicMirrorMounts
N-480 series miniature motorized kinematic optical mirror mounts are equipped with PI's high precision PiezoMike motors for ultra-high resolution angular adjustments in two tilt axes (θX and θY) down to 0.3 µrad steps. They are available for mirror and optics sizes of 0.5", 1" and 2" diameter. The high precision PiezoMike motors can be computer-controlled and will hold a position with high stability, even when not energized. Manual adjustment of the N-480 two-axis optical kinematic mounts is also possible. These types of tip/tilt mirror mounts are often used in optics research and for laser beam control and beam delivery systems. For high-speed laser beam steering, PI offers piezo flexure steering mirrors and voice-coil steering mirrors.
Compliance with Applicable Laws; Export Control Laws User access to this website is governed by all applicable federal, state, and local laws. All information available on this website is subject to U.S. export control laws and may also be subject to the laws of the country where you reside.
ThorlabsKinematicMount
Polarization, also called wave polarization, is an expression of the orientation of the lines of electric flux in an electromagnetic field (EM field).
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 8 ° × 8 ° rotational angle (θX × θY); frame with opening to the right; for 2" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
KinematicBase
With magnifying glasses and journals, children work together to examine whatever they find—from leaves and soil to pebbles and ants. They then write about or ...
Stable alignment of optical paths. Long-term positioning stability: High stability at target position, reliable startup even after longer downtimes. High holding force and resolution by combining piezo actuators with mechanical thread translation. Vacuum-compatible to 10-6 hPa.
Kinematicmount wiki
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 16 ° × 16 ° rotational angle (θX × θY); frame with opening to the right; for 1" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
12MP Wired Outdoor Dome Add-on PoE IP Surveillance Security Camera with Smart AI Detection Spotlight, 2-Way Audio
Otterbein TARDA Erstarrungsverzögerer - 80 g Fläschchen ... Zusatzmittel zur Regulierung des Erstarrungsbeginns von Prompt Fix-Zement (Romanzement / ...
20141028 — Due to the introduction of the RT products range, production of OEPL series projection optics will be discontinued.
Kinematic mountsfor optics
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 16 ° × 16 ° rotational angle (θX × θY); closed frame; for 1/2" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
Jun 5, 2013 — Pellicle beamsplitters are very thin, lightweight polymer membranes stretched and bonded over a flat aluminum frame.
Kinematiccoupling
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 16 ° × 16 ° rotational angle (θX × θY); closed frame; for 1" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
AXIS P3935-LR is a robust, vandal-resistant IP camera. The product. AXIS P3935-LR Network Camera. Best-in ...
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 8 ° × 8 ° rotational angle (θX × θY); frame with opening to the left; for 2" optics; vacuum-compatible to 10-6 hPa; 1 m cable length
Sep 27, 2012 — Collimation in terms of a reflector is setting the mirrors and eyepiece all in line and setting the secondary at the correct angle. The eyepiece ...
Kinematicmount design
Sep 15, 2020 — To judge the performance of a microscope, the FIELD of VIEW (FOV) is a criterion of interest. What is this FIELD of VIEW?
Compact, inexpensive inertia drive principle (stick-slip). At rest, the drive is self-locking, requires no current, and does not generate any heat. It holds the position with maximum force.
Quick Reference. The phenomenon in which electromagnetic waves, such as light waves, vibrate in a preferred plane or planes; or the process of confining the ...
Kinematic mirror mount with PiezoMike linear actuators; piezoelectric inertia drive; 16 ° × 16 ° rotational angle (θX × θY); frame with opening to the left; for 1" optics; vacuum-compatible to 10-6 hPa; 1 m cable length