202422 — Any lens with a focal length of between 8mm and 24mm is usually described as an ultra-wide. You'll be taking in a huge angle of view of what's ...

Use the oblique construction line tool from the Sketcher toolbox to help position and align objects along an arbritrary oblique line defined by two points.

They're so light weight they won't affect how your helium balloons float! So grab some Mini Flashing LED Clip on and Balloon Lights today and start on your next ...

Vision inspection systems (sometimes referred to as machine vision systems) provide image-based inspection automated for your convenience for a variety of ...

About. Dr. Edmund Seto is Professor in the UW Department of Environmental & Occupational Health Sciences. He received his PhD in Environmental Health Sciences ...

The oblique construction line appears when you select the first point. The line rotates about this point until you select the second point.

The following figure illustrates how an oblique construction line and a set of vertical construction lines can be used to align circle centers: You can also use an oblique construction line to define the axis of rotation for revolved solids and surfaces.

2012611 — File:Numerische.Apertur.Winkel.png ... Size of this preview: 800 × 593 pixels. Other resolutions: 320 × 237 pixels | 640 × 474 pixels | 1,024 × ...

Click mouse button 2 anywhere in the Abaqus/CAE window. Select any other tool in the Sketcher toolbox. Click the cancel button in the prompt area.

2023629 — Because it's a telephoto lens. That's what a telephoto lens is. It's a lens with a very narrow FoV. That small FoV is a result of having a ...

Click two points that will lie on the oblique construction line. Alternatively, you can type their X–Y coordinates in the text field that appears in the prompt area. The oblique construction line appears when you select the first point. The line rotates about this point until you select the second point.

Use the oblique construction line tool from the Sketcher toolbox to help position and align objects along an arbritrary oblique line defined by two points.

202148 — There are two useful full bright field lighting techniques for verifying the presence of the brass-colored screw: Diffuse Dome lighting or Coaxial Diffuse ...

From the construction tools in the Sketcher toolbox, select the oblique construction tool . For a diagram of the tools in the Sketcher toolbox, see The Sketcher tools. Abaqus/CAE displays prompts in the prompt area to guide you through the procedure.

20211221 — Visualize how aperture, focal length and distance from a subject affect depth of field.,

201328 — Image Studio Lite requires little manual input, allowing researchers to obtain signal intensities for each band quickly and accurately, with ...

2021729 — The focal length range of a lens is expressed by a number, and that number tells you how much of the scene your camera will be able to capture.

When you have finished creating oblique construction lines, do one of the following: Click mouse button 2 anywhere in the Abaqus/CAE window. Select any other tool in the Sketcher toolbox. Click the cancel button in the prompt area.