Advancement

No. You will be able to turn lights ON/Off remotely with DCC, but the dimmer controls on the Light Hubs will need to be adjusted manually.

Yes, you can mix different styles of Street and Wall Mount Lights on one Linker Plug, just be sure not to exceed the number of lights in any one package.

No. You will be able to turn lights ON/Off remotely with DCC, but the dimmer controls on the Light Hubs will need to be adjusted manually.

The rated output for the Power Supply is 1000 milliamps (mA). To determine the total number of Just Plug LED Lights the Power Supply can support, add up the milliamps of each LED Light being used. The milliamps are listed on the light packages. Total number of milliamps should not exceed 1000mA per Power Supply. If 1000mA is exceeded, the Power Supply's non-replaceable thermal fuse will be overloaded.

Light Hub Ports are designed as current sources, not voltage sources. Each Light Hub Port provides up to 30 milliamps (mA) of current.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

Yes, you can mix different styles of Street and Wall Mount Lights on one Linker Plug, just be sure not to exceed the number of lights in any one package.

Available

Just Plug Light Hubs can be powered with either DC or AC power. We recommend using 16-20VAC or 24VDC. If a lower AC or DC voltage is used, the light may be dimmer. Do not exceed 20VAC or 24VDC.

Use the Just Plug Light Block Kit. Apply Masking Paint to interior walls to keep the building from glowing. Press the included Ribbon Putty into interior corners, joints, and along the bottom edges of structures to seal the seams.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

Just Plug® Billboards are an easy way to add life and flair to any scene by advertising local shops or destinations. They are a staple of every town and are often found along highways, buildings or on rooftops. Each one includes preinstalled LED lighting to highlight the unique designs and add interest to your layout.

Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

advanced中文

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

Built-&-Ready structures are hand-painted, highly detailed ready-to-place buildings. Most include Dry Transfer Decals, window treatments and/or scene-setting accessories. Each of these buildings contain pre-installed LED lighting designed for use with our Just Plug Lighting System.

The rated output for the Power Supply is 1000 milliamps (mA). To determine the total number of Just Plug LED Lights the Power Supply can support, add up the milliamps of each LED Light being used. The milliamps are listed on the light packages. Total number of milliamps should not exceed 1000mA per Power Supply. If 1000mA is exceeded, the Power Supply's non-replaceable thermal fuse will be overloaded.

Yes, you can mix different styles of Street and Wall Mount Lights on one Linker Plug, just be sure not to exceed the number of lights in any one package.

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

Enhance your layout with a unique flag that displays natural drapes in the material as it waves in the wind. Place flags in school yards, outside of homes, government buildings, depots and more. Each flag includes a Just Plug Spotlight to highlight the details.

The Automotive Transformation Fund is a key enabler of the transition to an electrified future. Through providing support through capital investment and R&D funding, we help those who want to make the most of UK expertise.

We have created grade crossing signals with Red Flashing LED Nano Lights. Run and glue the LED wire alongside the pole and crossing bar. Drill a hole through the bar and light fixture large enough for the Nano Light to fit through and super glue it in place. Camouflage the wire by painting it the same color as the pole and crossing bar.There are many different types of grade crossing signals. We cannot guarantee this technique will work for your particular signal.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

advanced是什么

Use the Just Plug Light Block Kit. Apply Masking Paint to interior walls to keep the building from glowing. Press the included Ribbon Putty into interior corners, joints, and along the bottom edges of structures to seal the seams. Click here to see a video on using the Light Block Kit to prevent glow.

With our deep sector expertise and cutting-edge knowledge of new propulsion technologies, we provide the insights that enable industry to make well-informed decisions to decarbonise the automotive industry.

Provide power quickly and easily to all of your Just Plug products. Just Plug's modular design allows for easy expansion and gives you the ability to control individual light brightness.

Woodland Scenics® • ©1997-2024 O CO • Phone 573-346-5555 • Fax 573-346-3768 • M-F 8-5 CST PO Box 98 • Linn Creek, MO 65052 • Legal Info • Privacy Policy • Contact • FAQs International Shipping Available

To connect the Just Plug Lighting System to DCC, use a Connecting Cable . Plug one end of the Connecting Cable into the CTRL Port on a Light Hub or Expansion Hub (JP5702). The other end of the Connecting Cable will be connected to a DCC relay unit (per DCC manufacturer instructions).

Sign up to receive our newsletter if you’re interested in hearing about automotive industry news, events, project funding opportunities, green job vacancies and success stories.

We support the automotive industry to accelerate its transition and develop the technology that will help us deliver the vehicles needed to meet our net-zero targets.

Just Plug® Value Packs were designed to provide an economical and time-saving option when creating larger layouts. Purchase items in a larger quantity, saving you money over buying items individually. Each pack comes with enough product to fill one Light Hub, which is also included along with product instructions. Take the guesswork out when ordering Just Plug Value Packs.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

Just Plug® Vehicles make it easy to model back-country roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done!

The rated output for the Power Supply is 1000 milliamps (mA). To determine the total number of Just Plug LED Lights the Power Supply can support, add up the milliamps of each LED Light being used. The milliamps are listed on the light packages. Total number of milliamps should not exceed 1000mA per Power Supply. If 1000mA is exceeded, the Power Supply's non-replaceable thermal fuse will be overloaded.

Advertisement

Appoint

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

No. You will be able to turn lights ON/Off remotely with DCC, but the dimmer controls on the Light Hubs will need to be adjusted manually.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

Just Plug® Wooden Pole Street Lights & Yard Lights are perfect for any train yard. They are highly detailed and authentically weathered. Just Plug and you're done!

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

Yes, you can mix different styles of Street and Wall Mount Lights on one Linker Plug, just be sure not to exceed the number of lights in any one package.

Just Plug Street Lights make it easy to add light and interest to corners, sidewalks, parks and more. Just plug and you're done!

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

We have created grade crossing signals with Red Flashing LED Nano Lights. Run and glue the LED wire alongside the pole and crossing bar. Drill a hole through the bar and light fixture large enough for the Nano Light to fit through and super glue it in place. Camouflage the wire by painting it the same color as the pole and crossing bar.There are many different types of grade crossing signals. We cannot guarantee this technique will work for your particular signal.

The Auxiliary Switch controls the ports that are to the right of the CTRL Port on Expansion Hubs and Light Hubs. Click here to view a video about the Auxiliary Switch and port control.

You can extend the length of your Just Plug Power Supply cable with an Extension Cable or our Extension Wire and Splicer Plugs.

In the White Light Kit, the white lights are similar in color to the Just Plug LED - Cool White. In the White/Amber Light Kit, the white lights are similar in color to Cool White and the amber lights are similar in color to Yellow.

Want to stay up to date on the latest competitions, insights, events, and news from the APC? Sign up for our newsletter to receive regular updates.

We have created grade crossing signals with Red Flashing LED Nano Lights. Run and glue the LED wire alongside the pole and crossing bar. Drill a hole through the bar and light fixture large enough for the Nano Light to fit through and super glue it in place. Camouflage the wire by painting it the same color as the pole and crossing bar.There are many different types of grade crossing signals. We cannot guarantee this technique will work for your particular signal.

Advantage

Yes, you can mix different styles of Street and Wall Mount Lights on one Linker Plug, just be sure not to exceed the number of lights in any one package.

Just Plug Wall Mount Lights make it easy to add light and interest to business structures and rural outbuildings, billboards, signs, factory docks and more. Just plug and you're done!

In advance

The Auxiliary Switch controls the ports that are to the right of the CTRL Port on Expansion Hubs and Light Hubs. Click here to view a video about the Auxiliary Switch and port control.

To connect the Just Plug Lighting System to DCC, use a Connecting Cable . Plug one end of the Connecting Cable into the CTRL Port on a Light Hub or Expansion Hub (JP5702). The other end of the Connecting Cable will be connected to a DCC relay unit (per DCC manufacturer instructions).

NEW Just Plug® Traffic Lights now availble in N, HO and O scales. View item page to learn more about these detailed lights.

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

The rated output for the Power Supply is 1000 milliamps (mA). To determine the total number of Just Plug LED Lights the Power Supply can support, add up the milliamps of each LED Light being used. The milliamps are listed on the light packages. Total number of milliamps should not exceed 1000mA per Power Supply. If 1000mA is exceeded, the Power Supply's non-replaceable thermal fuse will be overloaded.

Warm white has a yellow undertone, commonly attributed to an incandescent bulb and cool white has a blue undertone, commonly attributed to a fluorescent bulb.

Just Plug® provides a complete, quick and easy way to add realistic lighting. The modular design works for all scenes and allows easy, customizable expansion. It is easy to combine and add accessories like Vehicles, Street Lights, Wall Mount Lights and Just Plug-equipped Built-&-Ready® buildings. Read an excerpt on lighting from The Complete Guide to Model Scenery to learn more. You can also view the Just Plug video.

We have created grade crossing signals with Red Flashing LED Nano Lights. Run and glue the LED wire alongside the pole and crossing bar. Drill a hole through the bar and light fixture large enough for the Nano Light to fit through and super glue it in place. Camouflage the wire by painting it the same color as the pole and crossing bar.There are many different types of grade crossing signals. We cannot guarantee this technique will work for your particular signal.

Just Plug® provides a complete, quick and easy way to add realistic lighting. The modular design works for all scenes and allows easy, customizable expansion. It is easy to combine and add accessories like Vehicles, Street Lights, Wall Mount Lights and Just Plug-equipped Built-&-Ready® buildings. Read an excerpt on lighting from The Complete Guide to Model Scenery to learn more. You can also view the Just Plug video.