I was thinking of it as a replacement for Super Glue acc, more controlable but it seems very pricy.  I wonder about shelf life too.

There is a new product out there called Bondic, it's a UV curable glue, comes in a pen dispenser that has a UV light on the end. You need to be careful to not look at the light as it will damage your eyes. While it does set up hard, and can be used as a filler that you can carve or sand after, I found that it doesn't always stick that well, it breaks off metal surfaces in particular. It is fine for detail parts, or stuff that doesn't get a lot of stress.

FIBERMASTER FIBRE OPTIC POWER METER / LIGHT SOURCE. Instant results using the FiberMASTER Power Meter (PM) and Light Source (LS). The power meter / light source ...

I began using this product to secure LED lights to the clear styrene rod lens when converting locos from incandescent bulbs. Works well with even 0402 SMD versions. A tiny drop of Faller Super Expert to hold in place and allow for positioning and then the UV liquid.

Improvements in UV-LED flux density, stability and life hours have made UV LEDs a viable solution for replacing traditional UV light sources such as mercury arc ...

We use UV-cured LocTite to hold glass conduits down onto LCD panels for display and control surfaces. What application were you thinking of?

Uniquely designed with an ergonomic handle. Lightweight 6w lamp for easy handling. Durable plastic housing. Models available with shortwave, longwave UV.

Sep 22, 2004 — As discussed in the section on parallax, that might suggest that the distance to Polaris was 1/40 of a parsec or less than 0.1 light year.

Contrast Lighting, Canadian Lighting Manufacturer vertically integrated. Our mission is to rank among the best lighting companies in the world not only by ...

The last time I worked with UV curing glues was about 11 years ago and you needed a lot of uv light to cure those in that it took a box with a very bright light and a couple minutes in said box.  If they have them working with small amounts of UV that are safe to use out in the open I wonder of they will react to general light as there is UV in most forms of light in one amount or another.

Has anyone any experience with UV glue?  I think my dentist uses it to hold my crowns own so it should be strong enough.  I'd appreciate your thoughts.

Soft diffused light gives stunning results for many flowers – especially pastel-toned ones; whereas direct sunlight is good for bold reds and oranges and ...

Feb 5, 2021 — Frankly, a ringflash could be very ideal for the situation mixed with ambient, however the photographer would need a powerful pack + ringflash ...

My understanding is the Bondic type products are not for metallic materials. I found it best to "lightly" rough up the adjoining surfaces to increase the bond strength. Not a file it a fine textured finger nail type thingy.

This fascinating UV bar black light is lightweight but an effective UV product to help transform your sensory space. The ultraviolet light from this sensory ...

For the curing, I have a 5-LED mini flashlight I used in Phoenix to look for scorpions (they glow) which works well, too.

A beam of light incident on the metal surface is reflected. Reflection involves two rays - an incoming or incident ray and an outgoing or reflected ray.

Reflection: When unpolarized light is incident on a boundary between two dielectric surfaces, for example on an air-glass boundary, then the reflected and ...