Light pipe for PCB plug-in mounting. Transparent lens Ø2,8 mm in flat face design. Heights from panel to light diversion from 5 to 15 mm and lengths from PCB to panel 14 to 20 mm

Light pipe for plug-in mounting from the front of the panel. Transparent Ø3 mm dome lens. Light pipe lengths from 2.5 to 30.5 mm

Pure cylindrical forms crafted from precision milled anodised aluminium or pure brass. A custom-built glass lens that brings you a low glare light experience. Industry leading LED technology, delivering up to 1100 lumen. Its ability to rotate – up to 30° of tilt and 360° of rotation – along with its IP rating make it perfect for any type of room. Introducing a fixture that’s stunning in every way you look at it.

Rigid light pipes are available in a wide range of designs, heights and lens shapes, through to multi-lens or multi-pipe bodies. Flexible light pipes offer the electrical designer almost every conceivable freedom of installation. Because the light is conducted through a flexible cable, the length of the cable can be chosen at will and the LED can be placed almost anywhere on the PCB. In addition, obstacles on the PCB play a secondary role with flexible light pipes.

Fourfold light pipe for PCB plug-in mounting. Transparent lens Ø2,8 mm in flat face design. Heights from panel to light diversion from 5 to 15 mm and lengths from PCB to panel 14 to 20 mm

Light guide for plug-in mounting from the rear of the panel. Transparent lens Ø5 mm in dome face design. Light pipe lengths from 3.2 to 38.1 mm

Light pipe for plug-in mounting from the rear of the panel. Transparent Ø3 mm flat-faced lens. Light pipe lengths from 2.5 to 21.1 mm

Screen shot

Light pipe for plug-in mounting from the front of the panel. In square shaped transparent lens design with 2 mm. Light pipe lengths from 2.5 to 12.7 mm.

Light pipe for plug-in mounting from the front of the panel. Diffuse lens Ø3.1 mm in dome face design. Light pipe lengths from 2.5 to 3.2 mm

Our light ventilation valve is designed for air extraction of up to 50m³/h and air supply of up to 30m³/h. Just like most regular ventilation valves, a downward airflow isn’t suited for installation in or above comfort zones. So make sure to correctly position air supply valves in the room, not above seating areas for example. More information and capacity graphs on the technical sheet. Don’t hesitate to contact us to check your ventilation plan for advice.

Light guide for plug-in mounting from the front of the panel. Transparent lens Ø3 mm in flat face design. Light pipe lengths from 2.5 to 12.7 mm

Lightshot

A light pipe is a cost-effective, space-saving and low-loss way of transmitting light from a light source, an LED. The LED is mounted on a printed circuit board, and the light from the LED is transported by the light pipe over a certain distance to the exit point. Flexible light pipes with a flexible body or rigid light pipes with a fixed body are used.

Light pipe for plug-in mounting from the front of the panel. Transparent Ø5 mm dome lens. Light pipe lengths from 3.2 to 38.1 mm

Our Ø108 plaster ring comes with a yellow plaster lid. The complementary connector makes it easy to add wires into your ventilation valve adapter. A big advantage of our Ø108 plaster ring lies in its compatibility with a wide range of solutions. Scroll down to learn more.

Allows you to seamlessly integrate Ø108 fixtures into a concrete ceiling (50mm recessed). Requires a concrete installation box. A big advantage of our Ø108-118 concrete ring lies in its compatibility with a wide range of solutions. Scroll down to learn more.

Piggyback double light pipe for PCB plug-in mounting. Transparent lens Ø3 mm in dome face design. Height from panel to light diversion 7,5 mm and length from PCB to panel 8 mm

Lightshot for PC

Light pipe for direct PCB mounting. Transparent lens Ø3 mm with round or flat face. Height from panel to light exit from 3.8 to 17.8 mm

screenshot下载

Under the ELPAC brand, we offer a wide range of plastic components for printed circuit boards and electronic enclosures. With high delivery reliability and quality products, we focus on long-term partnerships and accompany you through the entire life cycle of your application. Take a look at our B2B components shop to check prices, availability and place your order.

The vertical part of the ventilation adapter (before the start of the turn) must be at least 74mm high for the plaster ring to be installed correctly. The connector can’t be placed in this zone. With most valve adapters, this means you need a total height of at least 105mm. Check the Ø108 plaster ring installation instruction or watch the installation video to learn more about installation.

Made for thick plaster, adjustable from 12 to 33mm. Comes with a yellow plaster lid. The complementary connector makes it easy to add wires into your ventilation valve adapter.

Triple light pipe for PCB plug-in mounting. Transparent lens Ø2,8 mm in flat face design. Heights from panel to light diversion from 5 to 15 mm and lengths from PCB to panel 14 to 20 mm

Lightshot screenshot

Our Ø108 clt csc ring is the ideal trimless solution for cross laminated timber and cold stretch ceilings. The complementary connector makes it easy to add wires into your ventilation valve adapter.

Our light ventilation valve recieves its power via the valve adapter. Use our prado connector (complementary with the Ø108 plaster ring) to connect the Ø16 preflex to the valve adapter. All light ventilation fixtures are IP65 rated so they can even be used in the shower. Watch the installation video to learn more about installation.

Double light pipe for PCB plug-in mounting. Transparent lens Ø2,8 mm in flat face design. Heights from panel to light diversion from 5 to 15 mm and lengths from PCB to panel 14 to 20 mm

Light pipe for PCB plug-in mounting. Transparent lens Ø5,8 mm in dome face design. Height from panel to light diversion 22,5 mm and length from PCB to panel 22,3 mm

lightshot快捷键

We use cookies to provide functionality on our websites, to personalize function for your convinience, to provide social media features, and to compile access statistics. Various techniques may be used to share information about your use of our site with our social media and advertising partners. For more information, please see our Privacy Policy.

Flexible light guide with Ø4.2 mm lens (without LED) with base for direct PCB mounting. Flexible light guide available in standard lengths from 63.5 to 914.4 mm.

Screenshot on Mac

MEGATRON Elektronik GmbH & Co. KG Hermann-Oberth-Strasse 7 85640 Putzbrunn/Munich/Germany Tel.: +49 89 46094-0info@megatron.de

We work independent of any brand. Our light ventilation products are compatible with any ventilation system (DUCO, Renson, any other ventilation system). Our light ventilation products can be placed into any Ø125 valve adapter.

Screenshot software

The world’s first good looking ventilation valve. Made from precision milled, anodised aluminium. Works with Duco. Works with Renson. Works with every other ventilation system. Show what you want, hide what you need.

Extract up to 50m³/h. Completely invisible and incredibly quiet. The installation ring fits in every Ø125 ventilation duct, a flow setting scale and rasterized adjustment positions allow easy and accurate adjustment. Simply twist the light to start tweaking. Light and ventilation valve are easily retractable, ideal for maintenance. An integrated lock prevents from accidentally modifying the air flow after installation. Introducing a ventilation valve that effortlessly works with every ventilation system. Works with DUCO, works with Renson, works with every other ventilation system.

ZeroLightBleed™ light pipe with adapter for PCB mounting. Transparent lens Ø3 mm in dome or flat face design. Light pipe lengths from 8.9 to 50.8 mm

Flexible light guide with Ø4.2 mm lens, incl. LED with radial strands. LED in numerous colours and flexible light guide in standard lengths from 63.5 to 914.4 mm available.

Double light pipe for PCB screw mounting. Transparent lenses 2x4 mm in flat face design. Height from panel to light diversion 17,1 mm and length from PCB to panel 37,5 mm

Flexible light guide with Ø4.2 mm lens, incl. LED with axial strands. LED in numerous colours and flexible light guide in standard lengths from 63.5 to 914.4 mm available.

Invisible air supply and extraction, up to 50m³/h. Works for your bathroom. Works for your living room. Works for any other room.

Light pipe for PCB plug-in mounting. Transparent lens Ø3 mm in dome or in flat face design. Light pipe lengths from 2.4 to 13.8 mm

By using the website and its offers and continuing to navigate, you accept the indispensable cookies. In the cookie acceptance options you can manage the categories of cookies and allow additional categories. By clicking the "Accept" button, all categories of cookies are activated. You can revoke your consent at any time with effect for the future. For further information, please refer to our cookie policy as well as our privacy policy and imprint.