Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.

Power LEDStrip

Power LedPro

IMPORTANT : (1) LED’s can ONLY be driven by a constant-current source, and NOT a voltage source (e.g. a battery, or a AC/DC power supply etc.); (2) Please always verify LED’s current rating first before applying current to the LED, and please always make sure NOT to apply current that is above the LED’s current rating.

The new Type-H light sources are larger in dimensions compared with existing Type-A and Type-B light source. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the LED collimator sources. The LED collimators include a 1.5-meter cable with two bare-wire terminals at the end. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources.

Power LEDsoftware

An LED collimator consists of a collimating lens and an LED emitter. The LED emitter is placed at the focal plane of the collimating lens. The collimating lens thus images the LED emitter into infinity. Mightex LED collimators employ a high-NA aspherical collimating lens for precision collimation and high light throughput.

New Type-H super high-power collimator LED sources with 30-50W emitters have been added to the product portfolio. These new collimator light sources produce a market-leading optical power output of up to 3.3W, which is up to 5 times from our existing high-power Type-B collimator LED sources. The LED emitters are mounted directly onto the metal base of the collimator which also features an integrated heat sink and a cooling fan. This configuration minimizes thermal resistance between the LED emitter and the heat sink resulting in better heat dissipation. The collimating lens can be adjusted if needed for precise collimation. A locking ring fixes the lens position after adjustment. The collimators have been pre-adjusted in the factory.

Power LEDMonitor

Power LEDDriver

Performance Specifications Part NumberTypeWavelength (nm)Half Diverging Angle(deg.)Iop(A)Vop(V)Typical Output Power (mW)2 φ 22mm 1 φ 38mm 1 φ 48mm1 LCS-0365-76-xxH365532.2184.210000LCS-0405-65-xxH405532.2183.68300LCS-0405-89-xxH405532.2243.79900LCS-0415-65-xxH415532.2183.66000LCS-0470-50-xxH470532.2133.86300LCS-0470-61-xxH470532.2183.47500LCS-0470-92-xxH470532.2273.49000LCS-0525-60-xxH525532.2134.61300LCS-0525-79-xxH525532.2184.41560LCS-0560-68-xxH560 broadband532.2183.83500LCS-0560-84-xxH560 broadband532.2223.83800LCS-0625-38-xxH625532.2132.92700LCS-0625-42-xxH625532.2182.33300LCS-0730-77-xxH730532.2185.93500LCS-0780-65-xxH780532.2183.64400LCS-0850-68-xxH850532.2183.755500LCS-6500-33-xxHglacier white, 6,500K532.293.72000LCS-6500-65-xxHglacier white, 6,500K532.2183.73500 1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number. 2. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Discontinued PartsPart NumberTypeWavelength (nm)Half Diverging Angle(deg.)Iop(A)Vop(V)Typical Output Power (mW)3φ 11mm 1 φ 22mm 1 φ 38mm 1 φ 48mm 1 LCS-0365-48-xxH36510532.2123.92000LCS-0405-50-xxH30510532.2133.82500 1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number. 2. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Multiwavelength Solutions. Type-H collimated LEDs can be combined to form multiwavelength LED solutions using the multiwavelength beam combiners.