Light Shaping Diffusers® are often applied in architectural lighting, can lights, decorative lighting, pool lighting, set/event lighting and wall wash lighting where the effects of the Light Shaping Diffuser® can be quite dramatic. LED Light Shaping Diffusers® are also used in illumination systems such as aircraft inspection lights; backlit systems such as cellphone and PDA displays; LCD screens and more. One of the most common uses for our light diffusers is to eliminate hot spots on LED light strips.

Luminit’s DTF (Direction Turning Film) is a non-symmetrical linear micro-prismatic that imparts a 20-degree shift in the angle of a semi-collimated light source. The DTF works well with LED light sources that utilize secondary optics. Some applications include recessed can lights to allow for more wall washing, pathway/stair lighting to reduce glare and increase ground illumination, and pool lighting to increase illumination of the bottom.

Our display Brightness Film (DBF) is a light management film that increases the brightness of LCD displays. DBF is a prismatic structure with either a 1, 2, 3.5, 10 or 20-degree diffuser on the other side of the film. DBF is also available without the diffuser.

This will depend on the secondary optics you are using; however, the following chart can help determine the resultant beam angle.

We recommend you find a mechanical means of securing the diffuser into your system, for example using the natural tension of a film on curved surface. We offer pressure-sensitive adhesive (PSA) as an option but this process is difficult and you may experience the incorporation of air bubbles during the lamination process.

Yes, our lighting diffuser film is approved by AMECA as meeting the three-year weathering test of SAE J576 for plastics used in optical lenses and reflectors on motor vehicles.

The large amaryllis Spotlight® brightens up any space. This striking amaryllis has lovely, large flowers with broad white and pink petals. The heart of the flower is apple green and each petal has beautiful red markings along its edges. This delightful large amaryllis looks great in any home! Spotlight is easy to care for and is guaranteed to bloom.Buy your Spotlight amaryllis now online.

Since our microstructures are random and non-periodic, the Light Shaping Diffuser® is not wavelength-dependent, so it works well from 400nm to 700nm.

The diffuser has improved transmission characteristics if the microstructure side is facing the light source, but it has better source hiding characteristics if the microstructure side is facing away from the light source.

Because we replicate our holographic LED diffusers directly onto rigid panels instead of through a lamination process, our LED diffuser panels will not become brittle, peel or yellow over time.

Luminit's unique LED optical diffuser material is available in a variety of circular and elliptical angles from 1° to 100° on thin film or rigid substrates. Standard angles include: 80ºx50º, 60ºx10º, 80º, 60º, 40º, 30°, 20°, 10°, and 5°. We also offer non-standard angles, including 1°, 2°, 3.5°, 30°×35° 40°×1°, 60°×1°, 69°×30°, 75°×45°, and 90°×10°.

The EVD unit has an 81% transmission efficiency in the “on” state and 78% in the “off” state measured at 550 nm at 28°C. Anti-reflection coated glass laminates are available on a special order basis to improve transmission.

Thin-film Light Shaping Diffusers® are available in rolls, sheets or parts cut to your specifications. Standard rolls are 20” wide and 500’ long. Strip rolls are also available in your specified width. 24"x 24" rigid sheets are available on polycarbonate in various thicknesses. Contact sales for a quote.

Our Light Shaping Diffusers® are bending, shaping and enhancing light beams in automotive lighting, exterior/interior lighting, in stages and concert halls, projection systems, monitors and displays, bar code scanners, and more. Our LED diffusers are sculpting light in some of the world's most famous landmarks.

The light will follow the specular ray. When the AOI is non-zero, the distribution center will follow the transmitted direction. The Zemax models we provide offer a good prediction of the ray distribution. You can see the light path and distribution patterns.

For indoor applications, a Light Shaping Diffuser® can last as long as the light structure. For outdoor applications, measures may need to be taken to prevent  yellowing of the film due to exposure to the sun. For outdoor lighting applications, Luminit offers an optional UV-stable substrate to help prevent yellowing.

FWHM is an abbreviation for Full-Width Half-Maximum which is the angle of diffusion that would be seen after a collimated laser passes through the diffuser.

The large amaryllis Spotlight® brightens up any space. This striking amaryllis has lovely, large flowers with broad white and pink petals. The heart of the flower is apple green and each petal has beautiful red markings along its edges. This delightful large amaryllis looks great in any home! Spotlight is easy to care for and is guaranteed to bloom.Buy your Spotlight amaryllis now online.

Though our LED diffuser sheets are often installed in outdoor environments, they are not waterproof. Submerging the diffuser film or sheet in water would dissolve the microstructures and render the diffuser unusable.

The transmission efficiencies of Luminit optical diffusers are rated between 85-92% (depending on the angle). This very high-efficiency rating is due to the fact that our technology is based on diffractive microstructures. Smaller angle diffusers have the highest transmission.

Luminit offers a sample page with 9 samples about 1” square as well as larger A4 sized sheets of select single angles on 0.010” thick polycarbonate. Please select Request a Sample on the Luminit home page. While we do offer this complimentary kit to qualified customers, a UPS, FedEx or DHL account number is required.

Yes, Luminit optical diffusion films are so precise that beam shaping is possible. Our patented holographic master recording process allows a variety of circular and elliptical light patterns. Standard circular angles range from 0.5˚ to 100˚ FWHM. A wide variety of standard elliptical angles, ranging from 10˚x0.2˚ to 95˚x35˚, are available.

UGR stands for Unified Glare Rating and is an international standard that measures glare in lighting fixtures and designs. UGR standards are used by lighting designers and manufacturers to mitigate glare from artificial lighting.

Our blue protective film is used to protect the diffuser during transit to reduce the chances of scratches. We advise customers to remove the film within three months of arrival. The reason for this is that there is a chance that the adhesive on the film can cure or harden and stick to the diffuser.

We have models available for Zemax OpticStudio on our DLL downloads and offer our models libraries such as Photopia, LightTools, and Lucidshape. Visit our Modeling/Simulation page for more information.

We suggest you handle the diffuser with clean latex gloves. High angle diffusers are very prone to damage due the height of the microstructures. They can be cleaned carefully using optical wipes and ethanol using the industry-standard “drop and drag” technique.

Luminit Monolithic Glass Diffusers are made with an etching process, while our Glass on Glass light diffusers have pseudo-random microstructures that are cast and cured onto the surface of the glass. Temperature is one of the factors that differentiate the two. Our Glass on Glass diffusers are stable up to 500° C and are suitable for high-temperature laser applications. Monolithic glass is also rated for high temperature but is more suitable for lighting applications.

Automotive lighting engineers incorporate our diffusers into taillights and running lights to homogenize the output of LEDs as well as control the beam angle. If you've seen a recent model Dodge Durango while driving at night, you've seen our diffusers in action. Luminit light bending diffusion films are also used in automotive interior lighting, cluster panels, LCD displays, welcome mat lighting and more.

Light Shaping Diffusers® are micro-structures pseudo-randomly embedded on a substrate (such as film) which perform optical diffusion. When applied to a lighting structure, the Light Shaping Diffuser® can manipulate light by changing the direction of its energy. This allows our Light Shaping Diffusers® to clean up and shape a light beam to suit a particular purpose.

Yes, Luminit Light Shaping Diffusers® are commonly used as an LED strip light diffuser to eliminate the hotspots without a significant reduction in the amount of the light, provided that the diffuser is placed a sufficient distance from the LEDs. A rule of thumb is that the diffuser must be at least as far away from the LEDs as the LEDs are spaced apart.

No, since our technology is based on a surface relief pattern, these parameters are not dependent on the thickness of the substrate. However, there are inherently additional transmission losses if very thick substrates are utilized (Beer’s Law).

Yes, you can layer multiple sheets of DTF to increase the angle of redirection; however, there will be significant transmission loss.

Birefingence is the optical property of a material having a refractive index that depends on the polarization and propagation direction of light. In LCD screens, birefringence can create unwanted optical artifacts such as Newton's rings and moire. The high transmission efficiency of Luminit diffusers as well as the ability to homogenize a light source can preserve polarization and eliminate birefingence.

There are currently two different types of DTF products, one is a 20⁰ bend-off axis material for visible or white light and the other is a 10⁰ bend-off axis for 810nm (IR) LEDs.

This depends on the angle of divergence and spacing of the light sources. With 110° Field of View, surface mount LEDs, the relationship is around 1:1. That is, if the LEDs are spaced 1 inch apart then you will need a little more than 1-inch distance from the LEDs to our largest diffuser angles. Here is an illustration demonstrating the ratios with various angle diffusers.

The large Spotlight amaryllis has colorful large flowers with a diameter of about 16 centimeters. The stem of Spotlight is about 55 centimeters long and the flower bulb has a diameter of about 9 centimeters.Plant the amaryllis flower bulb in the flowerpot of your choice and place the pot in a light and warm place. Spotlight blooms after about 8 weeks.

Direction Turning Films can be combined with Light Shaping Diffusers to shape and homogenize the beam in addition to changing the direction. The beam can be shaped in a circular or elliptical pattern dependent on the diffuser angle chosen. These light bending films enable off-axis placement of the incoming beam when direct line of sight is impractical. Applications include LED lighting, avionics displays, traffic signs/displays and LCD backlights. They are also used to change the light beam direction to light a wall, walkway or other lighting target.

Yes, Luminit Light Shaping Diffusers® are available in various circular and elliptical angles in pre-cut sheet format for lower volume applications.

Yes, our Light Shaping Diffusers comply with RoHs standards. An environmental compliance statement can be downloaded here.

Luminit replicates diffusers on polycarbonate and acrylics (PMMA). We can also replicate our diffusers on glass products.

We recommend our glass diffuser for high temperature and high power laser applications. This diffusion material is stable up to 500 degrees Celsius and offers high transmission and high quality homogenized light for laser and other high damage threshold applications.

Cool earnings in Vavada affiliate programme. Become a Vavada Casino affiliate today to earn up to 0 per referred customer on the fast model, as well as earn up to 50% on long-term Revshare partnerships.

Yes, we are able to increase the transmission by adding AR coating to both sides of our diffuser having the percentages 95~98 depending on the beam angle.  Our microstructures are refractive, so the performance will be constant up to ~1200nm.