1. Make sure the Rosco sheet is properly oriented. If they are not the setup will not work correctly. To find the orientation, simply sandwich 2 sheets together in front of a light source and rotate oneof the 'till the blackout. Then mark both of them on one side at the top of each sheet and placed the over the lights with marks in the same direction. I mounted mine in cardboard frames with said markings.

So the specimen is laying flat in a black plastic container, I was planning on mounting a geared head to a lateral arm on top of my tripod, and placing this above the specimen. Placing a light above the specimen would end up causing shadows from the camera obstructing the light source.

If you want a compact camera that produces great quality photos without the hassle of changing lenses, there are plenty of choices available for every budget. Read on to find out which portable enthusiast compacts are our favorites.

Cross polarizationphotography

I just grabbed my CPL filter and viewed my monitor. As I rotate the filter it grayed down the whites and finally blacked out. When I reversed the filter, back to front, it goes BLUE!

Yeah it isnt, it works as intended when looking at my monitor, albeit with a blue tint as well unlike my sun glasses, which is rather disappointing since this was a $186 filter:

And when I rotated the CPL until it seemed to have a maximum effect, the reflects were minimized but what remained was blue again:

6. In some cases lie product still life, etc., regular polarization, justthe filter on the camer, is sufficient. That kind of setup works well with an overhead softbox- over the set.

I ordered some Rosco linear polarization film and cut out a piece. I put the round head on my Godox AD200 Pro, sandwiched some polarization film in front of it, and put a Sigma WR CPL on my lens. After rotating it to the correct angle with the modeling light on, I took a picture with the flash firing and the film was lit up blue:

What’s the best camera for around $1500? These midrange cameras should have capable autofocus systems, lots of direct controls and the latest sensors offering great image quality. We recommend our favorite options.

Yes circular, 82mm Sigma WR CPL on a 40mm Sigma Art with a Nikon Z7. Although this blue color happens even with two pieces of linear film and my naked eye (or camera).

Yeah it isnt, it works as intended when looking at my monitor, albeit with a blue tint as well unlike my sun glasses, which is rather disappointing since this was a $186 filter:

Perhas try shot without any polarization and just with the on-camera filter. If the cor is correct, by the process of elimination, you may isolate the issue to the Rosco fim.

2. Make certain that the CPL filter is somehow not reversed. The polarizing element in the filter is at the back, the side facing the camera.

Yes circular, 82mm Sigma WR CPL on a 40mm Sigma Art with a Nikon Z7. Although this blue color happens even with two pieces of linear film and my naked eye (or camera).

As for the overhead lighting: You can place the light slightly to the back of the specimen- not directly over it. Then fill in with a small reflector card covered wiht aluminum foil. You will still be able to bring the camera in directly over the subject. You will get good surface texture and detail.

What’s the best camera for around $2000? This price point gives you access to some of the most all-round capable cameras available. Excellent image quality, powerful autofocus and great looking video are the least you can expect. We've picked the models that really stand out.

I have used Rosco film with no color shift issues. My main polarizing screens for large bigger lighs were made by Bencher (no longer in business) and they are 25  years old- also no issues with strange color shifts.

Where is that ring light placed- off the camer or where the lenses concentric to the flash tube- the traditional mounting around the lens? I have never done that with a polarizer on the flash unit.

I'm looking to take a picture of a wet specimen - basically a biological sample in a bath of diluted formaldehyde and water lighted with a Godox R200 ringlight.

As for your biological specimen- perhaps try to light it from above as in the diagram in my previous post. Generally, a CPL filter can negat reflection in water but can rend ir as "black" and negate any texture.

Does the entire image turn blue or just the specimen? I have never shot anything formaldehyde, I wonder if it has properties that cause spectral changes.

Leica has announced the Q3 43, a variant of its full-frame fixed lens compact with a 43mm F2.0 normal lens. We've had the chance to use and test it, to produce an in-depth review.

Does the entire image turn blue or just the specimen? I have never shot anything formaldehyde, I wonder if it has properties that cause spectral changes.

I also tried taking a picture of reflections in a glass. I rotated the CPL until it didn't seem to be effecting the image and got reflections as expected:

I havent shot it yet. I was first just testing out this film as soon as I got it. I suppose regardless I'll try to cut a gel to fit the R200 this weekend and give it a shot and see what I get.

3. The drinking glass in your image is multi-faceted and the reflections are coming back to the camera from various angles. If the above remedies do not work, try moving the lights. The angleof incidence is an important consideration in polarization.

I have these Sigma WR CPLs in mutiple sizes. When looking through them with my eye from the same direction the lens does, they all block most of the light from my monitor except for part of the blue spectrum. When looking through them the wrong way, it tints the color somewhat yellow or blue depending on the orientation of the filter, similar to what I would expect from a a Singh Ray Gold-N-Blue polarizer

I mean from the photos above pointing at my display, it looks like both my CPL and the film arent polarizing 100% of the spectrum, but my sun glasses do.

I have these Sigma WR CPLs in mutiple sizes. When looking through them with my eye from the same direction the lens does, they all block most of the light from my monitor except for part of the blue spectrum. When looking through them the wrong way, it tints the color somewhat yellow or blue depending on the orientation of the filter, similar to what I would expect from a a Singh Ray Gold-N-Blue polarizer

Crosspolarizedlightmicroscopy

2. Make certain that the CPL filter is somehow not reversed. The polarizing element in the filter is at the back, the side facing the camera.

I mean from the photos above pointing at my display, it looks like both my CPL and the film arent polarizing 100% of the spectrum, but my sun glasses do.

And when I rotated the CPL until it seemed to have a maximum effect, the reflects were minimized but what remained was blue again:

I havent shot it yet. I was first just testing out this film as soon as I got it. I suppose regardless I'll try to cut a gel to fit the R200 this weekend and give it a shot and see what I get.

Marshall Electronics, Inc. | 20608 Madrona Avenue, Torrance, CA 90503 USA | CareersPhone: (310) 333-0606 | Toll Free: (800) 800-6608 | Fax: (310) 333-0688 | Support@marshall-usa.com © 2024 Marshall Electronics, Inc.

Does the entire image turn blue or just the specimen? I have never shot anything formaldehyde, I wonder if it has properties that cause spectral changes.

Considering that this issue happens even when looking at the light straight on, I doubt the facets in the glass are causing this problem.

I'm looking to take a picture of a wet specimen - basically a biological sample in a bath of diluted formaldehyde and water lighted with a Godox R200 ringlight.

I have these Sigma WR CPLs in mutiple sizes. When looking through them with my eye from the same direction the lens does, they all block most of the light from my monitor except for part of the blue spectrum. When looking through them the wrong way, it tints the color somewhat yellow or blue depending on the orientation of the filter, similar to what I would expect from a a Singh Ray Gold-N-Blue polarizer

So the specimen is laying flat in a black plastic container, I was planning on mounting a geared head to a lateral arm on top of my tripod, and placing this above the specimen. Placing a light above the specimen would end up causing shadows from the camera obstructing the light source.

Image

We don't usually test a product for ten years before reviewing it, but after a decade of using the Lowepro Photo Sport 300 AW II on an almost daily basis, Managing Editor Dale Baskin tells us why he loves this pack.

I just grabbed my CPL filter and viewed my monitor. As I rotate the filter it grayed down the whites and finally blacked out. When I reversed the filter, back to front, it goes BLUE!

So the specimen is laying flat in a black plastic container, I was planning on mounting a geared head to a lateral arm on top of my tripod, and placing this above the specimen. Placing a light above the specimen would end up causing shadows from the camera obstructing the light source.

As for your biological specimen- perhaps try to light it from above as in the diagram in my previous post. Generally, a CPL filter can negat reflection in water but can rend ir as "black" and negate any texture.

Image

1. Make sure the Rosco sheet is properly oriented. If they are not the setup will not work correctly. To find the orientation, simply sandwich 2 sheets together in front of a light source and rotate oneof the 'till the blackout. Then mark both of them on one side at the top of each sheet and placed the over the lights with marks in the same direction. I mounted mine in cardboard frames with said markings.

6. In some cases lie product still life, etc., regular polarization, justthe filter on the camer, is sufficient. That kind of setup works well with an overhead softbox- over the set.

The diffuser will integrate the light projection angles and, combined with having a little distance between the flash head and the polarizing gel, may make the combination work more like a virtual point source and yield better polarization results.In your example, you are also working with various angles of reflection from the glass, making the math much more complicated as well.

Image

I mean from the photos above pointing at my display, it looks like both my CPL and the film arent polarizing 100% of the spectrum, but my sun glasses do.

Crosspolarizedlightgeology

4. Polariazg filtration does not work well on metallic reflections.  I have experienced cases where they discolor metallic reflections rather than negating them.

I was wondering if someone could help me understand what is going on with my attempts at cross polarization. I wanted to take some pictures with cross polarized light to remove specular reflections, and it is kind of working, but not exactly as expected. Instead of removing the reflections entirely, it seems to be doing it for only part of the spectrum, leaving the blue reflections behind.

Cross polarizationphotogrammetry

What's the best camera for travel? Good travel cameras should be small, versatile, and offer good image quality. In this buying guide we've rounded-up several great cameras for travel and recommended the best.

Yes circular, 82mm Sigma WR CPL on a 40mm Sigma Art with a Nikon Z7. Although this blue color happens even with two pieces of linear film and my naked eye (or camera).

* Pricing does not reflect freight costs and applicable taxes and duties * Pricing, specification and features are subject to change

2. Make certain that the CPL filter is somehow not reversed. The polarizing element in the filter is at the back, the side facing the camera.

Where is that ring light placed- off the camer or where the lenses concentric to the flash tube- the traditional mounting around the lens? I have never done that with a polarizer on the flash unit.

I ordered some Rosco linear polarization film and cut out a piece. I put the round head on my Godox AD200 Pro, sandwiched some polarization film in front of it, and put a Sigma WR CPL on my lens. After rotating it to the correct angle with the modeling light on, I took a picture with the flash firing and the film was lit up blue:

Cross polarizationfilter

3. The drinking glass in your image is multi-faceted and the reflections are coming back to the camera from various angles. If the above remedies do not work, try moving the lights. The angleof incidence is an important consideration in polarization.

Where is that ring light placed- off the camer or where the lenses concentric to the flash tube- the traditional mounting around the lens? I have never done that with a polarizer on the flash unit.

5. You may end up with some of the reflections remaining which is ok if they are well-placed and provide modeling and special highlight in the right places.

1.  Make sure the Rosco sheet is properly oriented. If they are not the setup will not work correctly. To find the orientation, simply sandwich  2 sheets together in front of a light source and rotate oneof the 'till  the blackout.  Then mark both of them on one side at the top of each sheet and placed the over the lights with marks in the same direction. I mounted mine in cardboard frames with said markings.

I havent shot it yet. I was first just testing out this film as soon as I got it. I suppose regardless I'll try to cut a gel to fit the R200 this weekend and give it a shot and see what I get.

When I was in vet school (a million years ago, it seems!) I was friends with the veterinary college photographer. His job was to photograph just about everything at the school, including close details of surgeries and dissections. For those, he always used a ring flash, specifically to get the shadowless light we know it gives; it was absolutely necessary, as a shadow could be confused for a structure, or contour, that wasn't actually there (of course, a ring-flash was also much more portable than a softbox, and easier to keep sterile). He may have used a CPL (I wasn't au fait with all the nuances of photography back then), but I'm pretty sure he didn't use polarising gels on his lights, or ring-flash. Must've just accepted specular reflections as they came.

Cross polarizationantenna

I was wondering if someone could help me understand what is going on with my attempts at cross polarization. I wanted to take some pictures with cross polarized light to remove specular reflections, and it is kind of working, but not exactly as expected. Instead of removing the reflections entirely, it seems to be doing it for only part of the spectrum, leaving the blue reflections behind.

I just grabbed my CPL filter and viewed my monitor. As I rotate the filter it grayed down the whites and finally blacked out. When I reversed the filter, back to front, it goes BLUE!

If OP has the time and flexibility, then I agree: an almost-on-axis softbox could be the way to go (means a very big sheet of polarising gel though). I've never heard of someone cutting a polarising gel and mounting it on a ring flash, if he can solve his spectral problem, it should be pretty useful.

Yes it is properly oriented. Even with two sheets of polarization film on top of one another, rotated 90 degrees to one another, looking at the modeling lamp through the two layers of film with my naked eye shows it to be blue similar to my first picture rather than blacked out. Also putting the film in front of the monitor still shows a blue tint is leaking through

Does the entire image turn blue or just the specimen? I have never shot anything formaldehyde, I wonder if it has properties that cause spectral changes.

Perhas try shot without any polarization and just with the on-camera filter. If the cor is correct, by the process of elimination, you may isolate the issue to the Rosco fim.

As for the overhead lighting:  You can place the light slightly to the back of the specimen- not directly over it.  Then fill in with a small reflector card covered wiht aluminum foil.  You will still be able to bring the camera in directly over the subject. You will get good surface texture and detail.

As for your biological specimen- perhaps try to light it from above as in the diagram in my previous post. Generally, a CPL filter can negat reflection in water but can rend ir as "black" and negate any texture.

Above $2500 cameras tend to become increasingly specialized, making it difficult to select a 'best' option. We case our eye over the options costing more than $2500 but less than $4000, to find the best all-rounder.

A faster sensor, improved autofocus and video see Nikon's third-gen mid-range full-framer go toe-to-toe against Canon's EOS R6 II and the Sony a7 IV. We feel its all-round ability lifts it to the top of the pile.

Where is that ring light placed- off the camer or where the lenses concentric to the flash tube- the traditional mounting around the lens? I have never done that with a polarizer on the flash unit.

Ellis VenerTo see my work, please visit http://www.ellisvener.comI am on Instagram @EllisVenerStudio“It's not about the f-stop." -Jay Maisel"If art is the destination, the craft is how you get there." - Robert Fripp.Don't be a photographer. Be photographing. (Paraphrasing William Faulkner's advice to writers.)

Do you have experience with Rosco film specifically? Did I just get a defective batch? Is it Rosco film just defective in general? Is there perhaps another supplier which would work better such as B + W? Rosco was the only supplier on Adorama which offered it in large pieces. The B + W at 200x200mm might just barely fit.

Off the top of my head, what might help is to put some diffusion o the head and then mount a larger sheet of polarizer at a small distance from the flash .

6. In some cases lie product still life, etc., regular polarization, justthe filter on the camer, is sufficient. That kind of setup works well with an overhead softbox- over the set.

Do you have experience with Rosco film specifically? Did I just get a defective batch? Is it Rosco film just defective in general? Is there perhaps another supplier which would work better such as B + W? Rosco was the only supplier on Adorama which offered it in large pieces. The B + W at 200x200mm might just barely fit.

I also tried taking a picture of reflections in a glass. I rotated the CPL until it didn't seem to be effecting the image and got reflections as expected:

As for your biological specimen- perhaps try to light it from above as in the diagram in my previous post. Generally, a CPL filter can negat reflection in water but can rend ir as "black" and negate any texture. Perhas try shot without any polarization and just with the on-camera filter. If the cor is correct, by the process of elimination, you may isolate the issue to the Rosco fim.

3. The drinking glass in your image is multi-faceted and the reflections are coming back to the camera from various angles. If the above remedies do not work, try moving the lights. The angleof incidence is an important consideration in polarization.

Perhas try shot without any polarization and just with the on-camera filter. If the cor is correct, by the process of elimination, you may isolate the issue to the Rosco fim.

Considering that this issue happens even when looking at the light straight on, I doubt the facets in the glass are causing this problem.

Yes it is properly oriented. Even with two sheets of polarization film on top of one another, rotated 90 degrees to one another, looking at the modeling lamp through the two layers of film with my naked eye shows it to be blue similar to my first picture rather than blacked out. Also putting the film in front of the monitor still shows a blue tint is leaking through

I just grabbed my CPL filter and viewed my monitor. As I rotate the filter it grayed down the whites and finally blacked out.  When I reversed the filter, back to front, it goes BLUE!