24VDC brown blue

This standard varies for each region or country. They are modelled based on code produced by national or international standards organizations.

The ColorSource Spot outperforms other four-color LED profiles, thanks to its precise combination of red, green, blue and lime emitters. ETC applied its extensive color-mixing knowledge to the fixture to ensure that it can achieve brighter, richer and more believable colors than other budget LEDs. And it accepts all the Source Four LED accessories, zoom and fixed-focus lens tubes, and CYC and Fresnel adapters.

0VDCwire color

There are also wiring color codes for DC power but we will only cover the NEC and IEC standards since they are more commonly used. These Include 5V, 12V, 24V wire color code, or even higher.

Please remember that older installations may use different colors. It is wise to make a note about color code history. With this strategy, we will get better safety and easier maintenance.

Indonesia uses the wiring color codes standard from PUIL 2011 (Persyaratan Umum Instalasi Listrik) adapted from IEC 60446 as follows:

60 Lumileds LUXEON® Rebel LED 6,932 Max lumens 42.4 Lumens per watt L70 rating (hours to 70% output): 54,000 hours (both variants)*

24VDCwire color codeIEC

The UK now adapts IEC 60446 as its own wire color codes from British Standard BS 7671:2001 Amendment No 2:2004. There is a little extension that UK also uses grey color as line conductor. Same as above, the UK wiring color code (with extension) along with 3 phase color chart will be:

Electrical wiring standard and electrical wiring installation are made with the purpose of the best safety for people and devices.

The wire color codes from this category are extension cord, power cable, and lamp cords wiring color. South Africa uses this IEC 60446 (International Electrotechnical Commission) for flexible cable:

Power cable colours

24VDCwire color codeUSA

The wiring needs to be taken seriously. We must follow the safety standards and installation practice. The types of the wire and its size are strictly classified to the operating voltage and current capability.

Fog lights usually have 2 wires, hot and ground. We advise you to use those two first to make sure it can light up. For the yellow, it usually acts as an adjuster on another electronics element such as dimming.

We need to know what is the specific purpose for each color before touching it (you better don’t touch or plug-unplug the cable unless you know what is the meaning of its color).

According IEC 60445 The colours hould be : Purpose Color Positive L+ RED Negative L- WHITE Ground M BLUE Center-tap N BLUE Protective conductor bi-color GREEN-YELLOW

For DC wiring color code, IEC has standard; that is: Purpose Color Positive Brown Negative Gray Ground Blue Center-tap Blue

100-240 VAC 50/60 Hz powerCON power in and thru 28 A at 120 V (First half-cycle) 46 A at 240 V (First half-cycle) 9 fixtures (15 A power thru connector) or 10 fixtures (R20 module or similar) 147 W / 1.87 W at 120 V 1.24 A at 120 V

Wire color codes or cable color code charts for both AC and DC are classified based on national standards for each region. You may find different colors in different countries, so that’s why we need to check it by ourselves or consult a professional.

230Vwirecolors

Electrical wiring is an installation of the electric devices and cables. The devices can be electronic boards, switches, sockets, and room lighting.

The wire color codes from this category are 3 phase color charts, all of the cable behind the wall, in the wall, or on the wall.

Swappable lens tubes between 5-90 degrees 79-24 mm Gate size 6.25”-14” (depending on lens tube) aperture size Pattern projection A or B Pattern size 1,200 Hz (default) and 25,000 Hz (via RDM) Can be used with Source Four LED CYC and Fresnel adapters

Get to know ETC’s ColorSource® Spot luminaire, which boasts the same Red+Green+Blue+Lime LED mix as the ColorSource PAR washlight, bringing natural color and bright white light within reach of every budget.

The wire color codes from this category are 3 phase color charts, all of the cable behind the wall, in the wall, or on the wall.

The wire color codes from this category are 3 phase color charts, all of the cable behind the wall, in the wall, or on the wall.

Wirecolour codes

Iecwire color

Canada follows the wiring color codes standard by Canadian Electric Code (CEC). The wiring color codes from CEC are classified into flexible cables and fixed cables.

If you have opened a light switch box or an electrical outlet, you might have encountered various confusing colored cables.

I purchased fog lights and they are made in china they have a red wire and a black wire and a yellow wire and I don’t know how to wire this can anyone help me

The wire color codes from this category are 3 phase color charts, all of the cable behind the wall, in the wall, or on the wall.

White Light is a trading name of d&b solutions UK Ltd. Registered Office: 20 Merton Industrial Park, London SW19 3WL Registered Company No. 01031687

The US follows National Electrical Code (NEC) wire color codes. The wiring color codes from NEC are classified into flexible cables and fixed cables.

Wire color code is a crucial thing to be noted. Especially for electricians, electrical engineers, technicians, and even regular people.

Keep in mind that not every country has all the wire color codes recorded in a document. When it comes to this, we need to use local custom or “alternative” colors.

Most of Europe uses this IEC 60446 (International Electrotechnical Commission) standard for electrical color code charts. The colors and the labels can be observed below: