Illumination Foundation | Disrupting The Cycle of Homelessness - illumination

 2024-08-08 04:57:31

Framegrabbers for: - Coaxpress interface - GigE, 2.5GigE and 10GigE Vision - USB3 vision Connect multiple industrial cameras to a single PC, using our Framegrabbers. It is possible to combine multiple framegrabbers into a single PC, creating possibilities to connect many cameras to a single pc.

VA Imaging offers industrial USB3 cameras up to 45MP and 1000fps+. These are used in industrial, pharmaceutical and machine vision applications. Our cameras comply with the industrial “USB3 Vision” standard. All USB3 cameras are equipped with a CMOS or CCD image sensor. Both cameras with and without housing are available. The USB3 board-level camera series is suitable for high volume OEM projects.

These modules offer a wide 160-degree angle of light, making them the perfect choice for channel lettering coverage, ensuring even light output.

Beside our strong portfolio for all standard applications, we can supply special lenses and custom machine vision on request.

Cables for industrial cameras such as: - Screw lock cables for USB3 cameras - Screw lock cables for GigE cameras - I/O cables for machine vision - Screw lock cables for 10GigE cameras- Cables for Coaxpress cameras All cables are compatible with our industrial cameras and fully tested by VA Imaging.Beside the cables on our website we offer many custom cables in every length or connector needed, often with a MOQ of 1pcs. Contact us for the possibilites.

I had ordered a camera but forgotten to include the required cable. the cable was ordered and delivered very fast. I had ordered a camera but forgotten to include the required cable. the cable was ordered and delivered very fast. Read more Read less

Not all our machine vision lensfilter are added as seperate products, therefore on this page you can customize your own lensfitler by selecting the desired bandwith and size.

The camera models in this category are EOL (end of life). This means that the cameras are not produced anymore. If you need a few pieces of a specific model, we still might have them available in our stock. Therefore contact us if you need one of these cameras, so we can check the stock. Also feel free to reach out for advise for the most suitable replacement.

Open source software is software that is free to use. We provide a list of open source software packages that are compatible with our machine vision cameras.

C-mount to M12 mount adapters, extension rings and focal length extenders for applications where standard lens solution are not providing the optimal field of view at the desired working distance. On the bottom of this page we explain how to use the different type of lens adapters like, C-mount to M12 mount adapter, extension rings and focal length extenders with M12 and C-mount lenses.

Below we explain how to use this specific strobe controller. This strobe controller has the following pinout:Inputs pinout:- White wire = Power+- Brown wire = Power –- Green wire = Trigger +- Yellow wire = Trigger –Output is wired to a 2 pin JST SM connector. (When removing the connector: Red wire = LED+ / Black wire = LED- )

Our wide portfolio of M12 lenses start at a focal length of 1.85mm, offering a very wide angle solution for your application.

High quality components and service! My order was handled quickly and arrived ahead of schedule. Would recommend. High quality components and service! My order was handled quickly and arrived ahead of schedule. Would recommend. Read more Read less

Our industrial right angled cameras are developed for machine vision and computer vision projects with limited installation space. The lens mount is 90-degree rotated, therefore a good solution in applications where there is little space in height. The total length of the lens and camera is shorter since the C-mount lens thread is located inside the right angled camera housing. A total reduction in height of 50mm is possible, because the cables are mounted on the side of the 90-degree industrial right angled camera.

The customer service is quick, friendly and helpful, shipping takes place fast and the quality of cameras and accessoires is excellent. Very useful is also the provided software, including coding e... The customer service is quick, friendly and helpful, shipping takes place fast and the quality of cameras and accessoires is excellent. Very useful is also the provided software, including coding examples to implement the cameras in our systems. Read more Read less

Our UV cameras offer a new way of inspecting objects using ultraviolet light. Standard cameras are limited to the visible light spectrum or infrared and miss sensitivity in the lower wavelengths. Our cameras are equipped with the latest image sensors that are sensitive in the wavelength range of 200nm to 400nm. The capability of accessing lower wavelengths has made it possible to achieve inspections and analyses that would be otherwise impossible with standard cameras. Pairing them with our UV lenses ensures high quality imaging results. Below is an overview of all of our models. You can also find more general information such as features and benefits of an industrial UV Camera at the bottom of this page.

Use the lens calculator to calculate the required focal length of the lens, based on your working distance and field of view.

Prompt responses to our many questions. A good selection of cameras despite shortages elsewhere in the industry and we have been able to specify some of these cameras to keep projects moving forwar... Prompt responses to our many questions. A good selection of cameras despite shortages elsewhere in the industry and we have been able to specify some of these cameras to keep projects moving forward. We continue to buy from Get-Cameras regularly. Read more Read less

A SWIR lens is used when you need to capture images across shortwave infrared (SWIR) wavelengths. A Visible+SWIR type of lens allows for the simultaneous imaging of scenes or objects in both SWIR and visible light which enables applications such as multispectral imaging, where information from different parts of the spectrum is utilized. Our SWIR lenses are designed to match our SWIR Cameras. They come in different focal lengths, making it simple to choose the right one for your needs. Pairing them with our cameras ensures high quality imaging results.

A telecentric lens is used in applications where high accurate measurements are required. This is because a telecentric lens has reduced image distortion, constant magnification, high resolution, no perspective errors and no lens shading. This results in an image where the magnification, light intensity and distortion are uniform across the complete field of view. With more than 100 options, our expansive portfolio of telecentric lenses offers a wide range of magnification and working distance options to suit diverse imaging needs. With customizable solutions, expert support, and our commitment to innovation, we help you achieve exceptional results in your machine vision application.

Daheng Imaging has a SDK free of charge that works with all Daheng Imaging industrial cameras. It includes programming examples and a demo program with user interface to easily set parameters (like exposure time) of the industrial camera. All different versions of the SDK can be downloaded from the download area.

IO Industries' 2ndLook software for Windows and Linux is a flexible, cost-effective tool designed to record video from industrial GigE and USB3 Vision cameras in either the factory or the research lab. Troubleshooting a manufacturing process and the recording of scientific experiments are common applications for this easy-to-use video recording software. With the H.264 encoder option, it's even possible to record H.264 streams from an industrial camera.

Bought quite a few cameras from these guys, prices are great, service is great, delivery times of the hardware is also very nice. Bought quite a few cameras from these guys, prices are great, service is great, delivery times of the hardware is also very nice. Read more Read less

Besides the standard computer vision product portfolio, We provide customized camera, lens and lighting solutions, already at low volumes and for fair prices. Some examples of customizations are, custom firmware, custom lens mount, custom connectors, fixed focus and fixes aperture lenses, custom size lights and custom wavelengths. We have also developed OEM machine vision lighting and controllers for customer specific projects. If you can’t find a standard solution, please contact us and we can check if a customized camera, lens or light solution would be a fit for your project.

From professional mechanics to the at-home garage hero, you need bright reliable lights. NextLED has put together a list of our top products to fit the needs of any automotive project. Your time is valuable, so we’ve narrowed down the selection to our best rechargeable, long-lasting, and reliable lights that shine in any dim space. Bright and dependable, LED automotive work lights are a necessity to getting the job done right the first time. You won’t make the same mistake twice after checking out our expert picks.

LED StrobeController

So far, all components meet expectation, it would be great, though, if 3d models for all components were available. So far, all components meet expectation, it would be great, though, if 3d models for all components were available. Read more Read less

VA imaging has a strong portfolio of line scan cameras. They are designed for diverse machine vision applications. Below you can find an overview of all our models. If you don’t find the solution that you are looking for, you can check our custom line scan camera solutions. More general information, such as features and benefits of an industrial line scan camera, can also be found at the bottom of this page.

VA Imaging sells GigE cameras up to 65MP for industrial, OEM and machine vision applications. Our leanest prices are directly visible for each GigE camera and you can buy them directly online. The industrial GigE cameras are available with a wide variety of sensors of well-known brands such as Sony, Gpixel and OnSemi. The image sensor is integrated in a compact aluminium GigE camera housing, but on request the cameras can be delivered without housing as well.

Maintained a good relationship and very good communication from start to finish to purchase the item. Maintained a good relationship and very good communication from start to finish to purchase the item. Read more Read less

We have bought a 20MP camera and lens with extension tubes to use it as a digital microscope in our lab. The support with selecting a lens was great. Connecting the USB3 camera was easy. We receive... We have bought a 20MP camera and lens with extension tubes to use it as a digital microscope in our lab. The support with selecting a lens was great. Connecting the USB3 camera was easy. We received everything on time. Read more Read less

Machine vision lighting refers to specialized lighting systems that provide the necessary illumination for the camera to capture high-quality images. Industrial lighting is a critical component for applications such as inspection, identification and measurement. It provides steady, constant light and you can choose from a variety of colours available which also makes it possible to achieve high contrast. All machine vision lighting is available on our online store, with quick delivery times. A selection of the most popular lights are available on our local express stock for immediate shipping. There is also the option to customize the lights, choosing between sizes and colours. Whether it's long-distance bar lights, ring lights, backlights or any other machine vision light, customization is possible.

Microscope lenses allow precise inspection and analysis with a high magnification. Our microscope lenses consists of two parts and are carefully selected by us. By making this selection for you, we can ensure optimal image quality while keep distortion to a minimum. The lens is designed for use with C-mount fittings and can be mounted directly to our machine vision cameras with a sensor size up to 1.1”. Our lenses are available in models that include a coaxial light input and models that do not include this extra light input. The microscope lenses are compatible with our C-mount industrial cameras, enabling you to seamlessly convert an industrial camera into a digital microscope. Using microscope lenses allows you to capture high-resolution magnificated images.

Fast delivery even without paying the speed premium Fast delivery even without paying the speed premium Read more Read less

Good site and perfect customer interaction. Good site and perfect customer interaction. Read more Read less

Get Cameras were extremely kind to sponsor us with some amazing equipment for our RoboCup student team, Delft Mercurians. We had no issues with the cameras, they perform as advertised and enabled u... Get Cameras were extremely kind to sponsor us with some amazing equipment for our RoboCup student team, Delft Mercurians. We had no issues with the cameras, they perform as advertised and enabled us to continue with the project and the company was extremely supportive of us overall. The customer service staff was friendly, easy to approach and helped us select the appropriate products which fit our use case perfectly. Read more Read less

At VA Imaging we offer high-quality, affordable lenses for industrial image processing and we have a wide range of industrial lenses with different mounting options such as: C-mount, M12 mount, F-mount, M42 mount and much more. We also offer a strong portfolio of specialized lenses such as: Telecentric lenses, SWIR, UV, Autofocus and Varifocal.Beside our strong portfolio for all standard applications, we can supply special lenses and custom machine vision on request.

Use the lens calculator to calculate the required focal length of the lens, based on your working distance and field of view.

Our UV lenses offer a new way to inspect objects using ultraviolet light. Standard lenses are limited to the visible light spectrum or infrared and miss sensitivity in the lower wavelengths. Using the lower wavelengths it is possible to achieve inspections and analyses impossible with standard lenses. Our UV lenses are designed to match our UV Cameras. Pairing them with our cameras ensures high quality imaging results. Below you have an overview of all our models. You can also find at the bottom of this page more general information about the UV Lenses. If you have any question, you can contact us.

- Machine vision camera mounting plates All accessories are compatible with our industrial cameras and fully tested by VA Imaging.

I contacted GeT Cameras to help out with selecting the best camera and lens solution for me. They provided great support. I ordered with express and received the products 2 days later :) I contacted GeT Cameras to help out with selecting the best camera and lens solution for me. They provided great support. I ordered with express and received the products 2 days later :) Read more Read less

VA Imaging’s CoaXPress cameras are designed for high-speed imaging, making them suitable for demanding industrial and professional applications. With the CoaXPress (CXP) digital interface, you get efficient handling of high-speed vision data, making these cameras perfect for applications like machine vision, medical imaging, and more.

Bright and dependable, LED automotive work lights are a necessity to getting the job done right the first time. You won’t make the same mistake twice after checking out our expert picks.

Solar 50 Lumens Black Outdoor Integrated LED Adjustable Beam Spotlight (2-Pack); Weather/Water/Rust Resistant. The Hampton Bay adjustable solar spot light 2- ...

SWIR cameras were introduced to the field of machine vision to augment the existing imaging technology and enhance precision and accuracy. They have the capability to reveal and detect objects that are otherwise inaccessible to the visible spectrum. Our SWIR cameras are Visible-SWIR, meaning that they can detect not only the SWIR range but also the visible field, eliminating the need of two separated cameras. The SWIR cameras can be used for a variety of applications such as moisture detection, semiconductors inspection or distinguishing different materials types. Besides the typical visible SWIR cameras, we offer SWIR cameras with the TEC cooling technology with the option of a fan. Using one of our Visible-SWIR lenses is highly recommend to pair with your Visible-SWIR camera. Our SWIR lenses in different focal lengths can be found here: SWIR lenses.

Our industrial imaging cameras are available with USB2, USB3, GigE, 2.5GigE, 5GigE and 10GigE interfaces. The cameras are equipped with the latest image sensors from Sony, OnSemi, Gpixel and other well-known industrial image sensor manufacturers. On the bottom of this page we discuss the industrial imaging camera interfaces VA Imaging offers, as well the pro and cons. If you need further support with selecting an industrial imaging camera, please contact us.

We sell industrial lenses with F-mount / M42 mount developed for machine vision cameras. Image sensors up to 35mm and 4K line scan sensors are supported. Our industrial F-mount / M42-mount lenses have better optical performance than consumer SLR lenses. Due to industrial grade, our lenses can withstand industrial conditions and are available for a long time. Use our lens calculator to determine the correct focal length for your F-mount / M42-mount lens, or get in contact to get expert advice on selecting the most suitable lens for your computer vision project.

The cameras are a great value for money and the lenses also. The software is outdated and needs refreshing. It took me considerable amount of time to discover how to access the camera features. The cameras are a great value for money and the lenses also. The software is outdated and needs refreshing. It took me considerable amount of time to discover how to access the camera features. Read more Read less

The use of a AFZ / Varifocal lens enables you to adjust the focal length of your machine vision system, making it suitable for a wide range of applications and products. Zoom lenses are available in both a manual and motorized version. Motorized zoom lenses feature multiple tiny integrated motors which control the lens by adjusting the focus, focal length, and/or aperture, depending on the specific model. It empowers the machine vision system by enabling adjustments to be made when conditions change or optimize the lens setup for different product types and sizes without the need for manual intervention. To effectively control the motorized lens, we have developed a lens control board. This board enables you to control the motors (up to three) via USB or RS232 signal. Subsequently you can modify individual parameters and load one of the ten preset configurations.

Connecting the industrial LED light to the controller is easy plug and play. Please note that the light voltage should be 12V or 24V and consumes not more than 2A.12V light -> you can use a standard 12V extension cable24V light -> you need to convert the 2 pin connector to a 3 pin connector using our cable 2 PIN to 3 PIN. You can than just connect the light easy

We needed a vision camera for our project very urgently. They where able to deliver it in a few days time. They responded quick to my emails also when I needed support. They send me an article how ... We needed a vision camera for our project very urgently. They where able to deliver it in a few days time. They responded quick to my emails also when I needed support. They send me an article how to quickly install the camera and set the most important parameters. it was very helpfull and within half an hour we had a good live view image. We have also ordered the lens they advised. It provides a nice and sharp image. Read more Read less

2020514 — Polarisation gives you increased acuity in your vision on any bright or dim day with the eradication of reflection. Polarised lenses work by ...

Connect the camera to the pc. Start the SDK (GalaxyView application when using a Daheng Imaging Camera) and connect to the industrial machine vision camera. To make the triggering working, make sure that you set the following settings (marked in the red box):Line selector -> line1Line source -> strobeWhen selecting “strobe” the camera’s will output a signal to Line1 when all pixels of the camera are OPEN at the same time.

Board level cameras are often integrated in products of our customers, like Ophthalmology devices, ANPR cameras, handheld devices, metrology devices and digital microscopes.

Industrial cameras are used in combination with computer vision software for image processing and to automate processes. Essentially, a single industrial camera on its own is not a complete machine vision system. The computer vision software communicates with the industrial camera to capture images. The software then uses algorithms to detect important characteristics for image processing. The possibilities are endless but a few examples of applications are product type detection, product positioning, shape recognition, measurements, OCR.

Our industrial USB3 single board cameras for embedded vision are available online. Boardlevel / PCB cameras are suitable for product developments that require a single board camera module with small formfactor and low price.These board level cameras have a USB3 interface for power, communication and image transfer. A separate connector provides an input and output to sync multiple boardlevel cameras, hardware trigger the cameras or control external lighting. Board level cameras are often integrated in products of our customers, like Ophthalmology devices, ANPR cameras, handheld devices, metrology devices and digital microscopes.

LEDLight

Most common questions are already answered on our FAQ page. Questions about delivery times, warranty, loan, returns, longevity, manuals etc.

VA imaging staat in het midden van creativiteit en praktische toepassingen en levert beeldverwerkingsproducten die zijn ontworpen voor gebruik in innovatieve machines. Wij bieden u de machine vision producten waarmee u uw creativiteit op vernieuwende manieren kunt toepassen. Met onze camera, lens en verlichting vindt uw innovatie een concrete uitdrukking in de wereld van Vision & Automation Imaging.

To effectively control the motorized lens, we have developed a lens control board. This board enables you to control the motors (up to three) via USB or RS232 signal. Subsequently you can modify individual parameters and load one of the ten preset configurations.

AmazonStrobeLights for trucks

Mar 22, 2019 — A web service that produces instructions, or light cues, for smart lights based on identifying specific types of scenes in a video.

A very good company, I will continue to cooperate next time！ A very good company, I will continue to cooperate next time！ Read more Read less

First I was a little bit sceptic about buying online industrial cameras. It’s a critical part for our machine. For a new product development there was a lot of price pressure. We needed a cheap cam... First I was a little bit sceptic about buying online industrial cameras. It’s a critical part for our machine. For a new product development there was a lot of price pressure. We needed a cheap camera. I called them and Caspar was providing great support. He even advised a cheaper camera than I had in mind. I was just surprised by the inhouse knowledge of get cameras about machine vision. Never expected this from a webshop. The image an built quality of the camera is also great. The camera feels and operates the same as our Basler cameras. Read more Read less

Buy color and polarization lens filters for C-mount lenses and C-mount cameras to get more contrast in your machine vision application. At the bottom of the page you will find detailed information about the different color and polarization lens filters. Not all our machine vision lensfilter are added as seperate products, therefore on this page you can customize your own lensfitler by selecting the desired bandwith and size.

To connect an industrial machine vision camera you need to have an I/O cable. In our case we are using a VA-CABLE-IO-HR25-8p-OE-5m. We need to use the (strobe) output of the industrial vision camera to trigger the strobe controller. In our case it’s an optocoupled output called line 1 using pin 7 (Line1- White/green wire) and 8 (Line1+ White/blue wire) of the industrial vision camera I/O connector.We have made a simplified drawing with the correct colours on how to connect the industrial machine vision camera, with the industrial strobe controller and the power supply.+The I/O cable of the industrial machine vision camera must be connected to the input port of the industrial strobe controller.Please note that if you use a 48V powersupply with a 24V light or a 24V powersupply with a 12V light, you can overstrobe the led light. Twice the current will go through the LEDS. As a result the light intensity will be more. However the duty cycle should be less than 10% to make sure that the LEDS will not degrade fast. So in 1 second time, the LED should be max 100ms (10%) on. With a framerate of 50fps, this would mean that the led should strobe for max 2ms per image.This is the complete schematic:Purely as background information, the camera output schematic:The strobe controller input schematic:

We already have several of your cameras. These are for stock only. Since we are taking them into stock, that means we are happy with them. Only lead time is little bit longer. We already have several of your cameras. These are for stock only. Since we are taking them into stock, that means we are happy with them. Only lead time is little bit longer. Read more Read less

Diffused LED Lighting. Light-Emitting Diode (LED) lighting provides a modern and more energy efficient lighting solution to traditional halogen bulbs. According ...

LED StrobeLights for trucks

I ordered a 20MP USB3 camera including a lens 2 months ago for a datamatrix code reading application. In the beginning I was sceptic because of the low prices, but support by email was great. They ... I ordered a 20MP USB3 camera including a lens 2 months ago for a datamatrix code reading application. In the beginning I was sceptic because of the low prices, but support by email was great. They advise a lens and provided additional technical information. Unfortunately they don't offer a loan service, but I decided to try it. I had the cameras in house within 2 weeks and connection was easy. The SDK looks like the SDK from Basler so I felt directly comfortable with it. The camera and lens was a perfect match and now I'm able to read small DMC codes on large products with just a single camera. Read more Read less

Aug 2, 2019 — A system that aims to help bartenders keep track of their customers with facial recognition and AI. There's just one teensy problem: Bartenders are really, ...

Accessories for industrial cameras and machine vision lighting, like mounting plates, powersupplies, tools and other accessories

Our universal machine vision camera housings protects machine vision cameras against moisture and dust. The lens settings can no longer be adjusted by operators. The enclosure has been tested in IP67conditions with our GigE, USB3 and I/O cables. It is one of the most affordable machine vision camera housing on the market

Our partner Zebra Technologies stands at the forefront of computer vision software. The well known Zebra Aurora Vision (previously known as Adaptive Vision) is a market leader for image processing software for industrial automation. VA Imaging is the official distributor for this powerful computer vision software package. On this page you can find several available software packages as well as success stories. Get in contact to be advised on the best software solution for your machine vision project.

We sell industrial lenses with F-mount / M42 mount developed for machine vision cameras. Image sensors up to 35mm and 4K line scan sensors are supported.

C-mount lenses stand out as one of the most common types of lenses for industrial applications. This is because of its standardized thread and the compact design, allowing it to easily combine with any of our industrial C-mount cameras. Our C-mount lenses are manufactured and designed to meet the high standards of durability and reliability, these standards are required to withstand harsh conditions such as those found in industrial environments. Featuring high optical performance and precise focusing, they deliver sharp images over an extended lifetime. Almost all our C-mount lenses are available on our local Express stock. This means that they ready for immediate shipping after ordering. For high quantities of C-mount lenses, we also offer short delivery times. Need a special lens for your project? We also offer custom machine vision lenses.

Accessories for industrial cameras and machine vision lighting, like mounting plates, powersupplies, tools and other accessories

The customer service staff was friendly, easy to approach and helped us select the appropriate products which fit our use case perfectly. The customer service staff was friendly, easy to approach and helped us select the appropriate products which fit our use case perfectly. Read more Read less

068451218-b

Open source software is software that is free to use. We provide a list of open source software packages that are compatible with our machine vision cameras.

Cables for industrial cameras such as: - Screw lock cables for USB3 cameras - Screw lock cables for GigE cameras - I/O cables for machine vision - Screw lock cables for 10GigE cameras

Now the triggering is programmed we have to set the exposure time. For a global-shutter industrial machine vision camera this is easy, because at exposure start all pixels are open for capturing light. Therefore any exposure time value will generate a strobe trigger pulse. For a rolling-shutter machine vision camera this is not the case.When a rolling shutter sensor is used, the strobe output will only work during the period that all lines of the sensor are exposed (see image below). In general you can say that the minimum exposure time, for using a strobe output = 1 / (max framerate). In our example the industrial vision camera can achieve 19fps, so minimum exposure time = 1/ 19 = 52ms. After 52ms all pixel lines are ready to capture light (exposed) and you can flash. If you want to flash a LED for 1ms (Strobe output time) the calculation for the exposure time = minimum exposure time + Strobe output time) = 52ms + 1ms = 53ms.You will notice that when you reduce for example the exposure time to 10ms, the strobe output is not working anymore, because there is no moment in time that all pixels of the rolling shutter camera are simultaneously ready to capture light.Using an exposure time of 53ms, could mean that the industrial vision camera is also capturing light from the environment. To solve that, you have to close the iris of the lens further. To do this:- cover up the LED.- Then close the iris of the lens till you see a black image.- Now uncover the LED- Adapt the brightness of the image by closing the Iris further (when the image is over illuminated) or increase the strobe output time (when image is to dark).In the software of the industrial machine vision camera you can set the exposure time under AcquisitionControl->ExposureTimeNow you have a working setup, where the industrial machine vision camera, triggers the industrial strobe controller to flash a machine vision led light.

GeT Cameras in Germany made some photo's of our products to show the performance of their cameras and they looked perfect. Recently we purchased a camera with lens, and LED lights. We are not exper... GeT Cameras in Germany made some photo's of our products to show the performance of their cameras and they looked perfect. Recently we purchased a camera with lens, and LED lights. We are not experienced with machine vision but the installation worked out fine. After installation on our laboratory we were surprised again of the high quality of the photos and the versatility of this system. (options in Galaxy viewer and integration in Python. Recently we had an issue with the software and the customer support was able to give us the relevant information to fix it within one day. The next time we need a camera we will not be looking to other suppliers but contact GeT Cameras immediately. Read more Read less

Ordered products were delivered sooner than promised, all ordered items were included in the package and we had no problems to make them work (cameras work with the attached software and with Matlab). Ordered products were delivered sooner than promised, all ordered items were included in the package and we had no problems to make them work (cameras work with the attached software and with Matlab). Read more Read less

In the commercial phase we had maximum support and delivery times were respected. The material is quite good with low and competitive costs. In the commercial phase we had maximum support and delivery times were respected. The material is quite good with low and competitive costs. Read more Read less

We offer M12 lenses / S-mount lenses designed for industrial cameras at competitive prices. All our M12 lenses support relatively large image sensors. The supported image sensor size varies between 1/2.5" to 2/3". Our wide portfolio of M12 lenses start at a focal length of 1.85mm, offering a very wide angle solution for your application. Do you need help selecting the most suitable M12/S-mount lens? Or if you cannot find an M12 lens in our webshop, please contact us. We can supply many other M12 lenses and have customized many lenses for specific applications of our customers.

Image processing software captures the images from an industrial camera and performs complex image processing tasks like segmentation, detection, code and text reading.

Beside the cables on our website we offer many custom cables in every length or connector needed, often with a MOQ of 1pcs. Contact us for the possibilites.

I liked that your team helped me chose the needed equipment by my description. The items that i have ordered are exactly what i have looked for. I liked that your team helped me chose the needed equipment by my description. The items that i have ordered are exactly what i have looked for. Read more Read less

This strobe controller can be programmed using dipswitches, without the need of connecting the strobe controller to a pc.The easiest way is to program the DIP switch of the industrial strobe controller for trigger on rising edge.The position of the DIP switch S1 will set the length of the output in milliseconds or microseconds.- In case of strobe pulse in milliseconds (11-1023ms) = dipswitch 4,3,2,1 are OFF-OFF-OFF-OFF- In case of strobe pulse in microseconds (10-1023us) = Dipswitch 4,3,2,1 are ON-OFF-OFF-OFF (As image below)The position of DIP switch S2 of the strobe controller is for the actual duration of the pulse.You need to set the value based on binary numbers, setting switches from right (marked S2.1) to left (marked S2.10).Here an example how to set up the strobe for 50 microseconds: 50 in binary is 0000110010So our switches will be set as 1=On 0=OFF ( starting from right column S2.1) OFF ON OFF OFF ON ON, and the unused dip switches will be OFF.

LED StrobeLight Bar

Explore our range of industrial 5GigE and 10GigE cameras available for purchase online. Equipped with sensors of well-known brands such Sony, Onsemi and Gpixel, they are suitable for high resolution and high frame rate applications. 10GigE cameras can achieve 10 times more bandwidth than a regular GigE camera, achieving 10 times faster frame rate at the same resolution as a GigE camera. They are suitable for applications where a high bandwidth is required with a long distance cables.To achieve the full bandwidth, simple pair our 10GigE cameras with our compatible 10GigE frame grabbers and 10GigE cables.Read all about 5GigE and 10GigE Vision camera interfaces in our machine vision Knowledge Center.

Image processing software captures the images from an industrial camera and performs complex image processing tasks like segmentation, detection, code and text reading.

LED StrobeLights for cars

Do you need help selecting the most suitable M12/S-mount lens? Or if you cannot find an M12 lens in our webshop, please contact us. We can supply many other M12 lenses and have customized many lenses for specific applications of our customers.

To achieve the full bandwidth, simple pair our 10GigE cameras with our compatible 10GigE frame grabbers and 10GigE cables.

4 Track Smart Chaser Controller - 4 Channel Controller - Adjustable Speed Control - 18 amps per channel - Made in the USA

- Small size, easy operation.- High trigger frequency: maximum up to 50KHz.- Short trigger response time: ≤10μs.- Triggering modes, suitable for various work environments.- Wide input voltage range from 12V DC to 48V DC, easy for using with the DC power supply on the machine.- LEDs can be overdriven to increase the intensity. Please note you need a 48V powersource to overdrive a 24V ledlight.- Wide trigger pulse width setting: 10μs ~1023ms can be set.- Max current 2A constant output. 4A transient mode.

Our industrial F-mount / M42-mount lenses have better optical performance than consumer SLR lenses. Due to industrial grade, our lenses can withstand industrial conditions and are available for a long time. Use our lens calculator to determine the correct focal length for your F-mount / M42-mount lens, or get in contact to get expert advice on selecting the most suitable lens for your computer vision project.

LED StrobeLight Kit

The camera arrived on schedule and gives excellent images. Very good value for money. The SDK makes it very easy to acquire images into a program of my own written using C++Builder (about 2 hours p... The camera arrived on schedule and gives excellent images. Very good value for money. The SDK makes it very easy to acquire images into a program of my own written using C++Builder (about 2 hours programming). Read more Read less

Arktura Backlighting. Arktura Backlighting is a lighting solution that fully integrates with Arktura's lines of ceiling and wall panels, Vapor®, VaporSoft®, ...

Extremely fast service. I got the camera next day. Highly recommend the seller! Thank you! Extremely fast service. I got the camera next day. Highly recommend the seller! Thank you! Read more Read less

The Chandler Limited 4-Pin Power Supply Cable is made to connect Chandler Limited rackmount products to the PSU-1 power supply.

We share our machine vision knowledge in our knowledge center. Find tutorials how to connect cameras, install software & program I/O.

Top, good experience. Very attentive and quick to respond. Product arrived in good condition. Top, good experience. Very attentive and quick to respond. Product arrived in good condition. Read more Read less

Accessories for industrial cameras such as: - USB2 cable screw lock - USB3 cable screw lock - GigE / 10GigE cable screw lock - I/O cable screw lock - PCIe card with 2x or 4x USB3 ports (USB3 HUB) - PCIe card with 2x or 4x POE GigE network ports- USB3, GigE, 10GigE, SPF+ and Coaxpress framegrabbers - Industrial camera enclosures- Machine vision camera mounting plates All accessories are compatible with our industrial cameras and fully tested by VA Imaging.

These board level cameras have a USB3 interface for power, communication and image transfer. A separate connector provides an input and output to sync multiple boardlevel cameras, hardware trigger the cameras or control external lighting.

Not all our machine vision lensfilter are added as seperate products, therefore on this page you can customize your own lensfitler by selecting the desired bandwith and size.

High quality Bar Open Neon Sign at best prices online. Design your own Bar Open Neon Sign for occasional events at Bannerbuzz.com.

VA Imaging is the official distributor for this powerful computer vision software package. On this page you can find several available software packages as well as success stories. Get in contact to be advised on the best software solution for your machine vision project.