Test all lights to confirm proper operation and reassemble the light housing. Finally, perform a walk-around inspection to ensure all lights function correctly and make any needed adjustments. This simple upgrade will improve your vehicle’s lighting performance and longevity.

Single-function and dual-function LED car bulbs serve distinct roles in vehicle lighting systems. Single-function LED bulbs are designed to perform a specific task, such as illuminating turn signals, reverse lights, or brake lights. They feature a single filament or contact point, activating one light capable of a single intensity.

LEDBacklight for TV that changes with picture

Converting your vehicle's tail, brake, and turn lights to LEDs is a straightforward process that enhances visibility and safety. To find compatible LED bulbs, use the Car Bulb Cross Reference to find the right replacement bulb for your vehicle.

Correlated Color Temperature (CCT) can be defined as the color of white light a light source is emitting. CCT is measured in Kelvin (K). The different color temperatures along the Kelvin scale correlate with different shades of white light, all of which impact how an individual perceives the space. LED lights are typically grouped into 3 different color temperatures: warm white, natural white, and cool white. Warm white gives off a yellow shade of light, natural light closely resembles the color of light given off from the sun, and cool light has a slightly blue tint to it.

LED tail, brake, and turn lights are essential for enhancing vehicle safety and visibility. These high-performance bulbs offer superior brightness compared to traditional incandescent lights, ensuring that your vehicle is clearly seen in all driving conditions. With a lifespan of 30,000 hours or more, LED tail light, brake light, and turn light bulbs are designed to last a lifetime on any vehicle.

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

LEDTail lights Strip

After confirming that the LEDs work correctly, reassemble the light housing and securely fasten it. Perform a final check to ensure all lights are aligned and functioning properly. This conversion enhances brightness, longevity, and energy efficiency, improving your vehicle's safety and aesthetics.

Integrate our low-voltage Spots with other light options from the Versaline® family to build the perfect atmosphere for your installation. Our DIY and Light Snap N Go infrastructure and LED Spot Lights carry a two-year warranty so feel free to use these for more than just one season.

Begin by ensuring safety by disconnecting the battery, then access the light housing by removing screws or bolts. Replace the old bulbs with LED ones, ensuring a snug fit, and test the lights to check for proper function, addressing any flickering with load resistors if necessary.

LED lights illuminate almost instantly when activated. This quicker response time can improve reaction times for drivers behind you, particularly in braking situations.

Back lightcomputer

The key difference lies in the pin configuration (offset vs. parallel) and the contact points (single vs. double). For example, 3156 is a single contact, whereas 3157 is dual contact, making 3157 capable of dual-function lighting.

With little expense or effort, our LED Spot Lights are a great tool for uplighting or downlighting trees, landscaping, walls, art, signage, you name it.

Backlight lighting

The main differences between LED bulb bases for car lights revolve around the number of contacts, the configuration of the pins, and whether they support single or dual functions. These factors determine compatibility, and bulbs should be selected based on the specific socket and function required for the vehicle lighting.

Power consumption is measured in watts, which indicates the amount of energy used by the light source. LEDs are highly energy-efficient, consuming significantly less power compared to traditional incandescent, halogen, metal halide, or fluorescent lights while providing the same level of brightness. Lower wattage in LED lights translates to reduced electricity bills and less environmental impact.

Choose from several bayonet and wedge bases, such as 1142 (BA15D), 1156 (BA15S),1157 (BAY15D),  3156, 3157, 7440, and 7443. Choose from CAN Bus, CK, and switchback options.

We always recommend checking our bulb dimensions and comparing with the space available where the bulb will be installed.

Carefully remove the old bulbs by twisting and pulling them out of the socket, then insert the new LED bulbs, ensuring correct polarity. If hyper-flashing occurs, install load resistors in parallel with the LEDs.

LEDs produce brighter, more consistent light than traditional bulbs. This is important for safety as well. When it’s easy for other drivers to see you, the risk of an accident is reduced.

In contrast, dual-function LED bulbs are designed to handle two tasks with the same bulb. These bulbs have dual filaments or contact points, allowing them to switch between two light intensities. This dual capability is particularly useful for tail lights and brake lights, where the bulb must operate at a lower intensity for regular tail light functionality and a higher intensity for braking.

LEDTail Lights Amazon

Correlated Color Temperature (CCT) can be defined as the color of white light a light source is emitting. CCT is measured in Kelvin (K). The different color temperatures along the Kelvin scale correlate with different shades of white light, all of which impact how an individual perceives the space. LED lights are typically grouped into 3 different color temperatures: warm white, natural white, and cool white. Warm white gives off a yellow shade of light, natural light closely resembles the color of light given off from the sun, and cool light has a slightly blue tint to it.

LEDtaillightbulbs

With a longer lifespan and lower energy consumption, LED bulbs provide a cost-effective and environmentally friendly lighting solution. They emit a faster response time, crucial for brake and turn signals, reducing the risk of rear-end collisions. Designed for easy installation, these LED lights are compatible with a wide range of vehicle models, making them a versatile and reliable upgrade for any car or truck.

Start by gathering the necessary tools, including the correct LED bulbs and load resistors if needed. Access the light housing by opening the trunk or rear hatch and removing any screws or fasteners.

With an operating temperature range of -22°-185° degrees Fahrenheit, LED lights are temperature resistant and excel in all weather conditions.

Directional lighting is a breeze with the built-in swivel and installation options include both a stake for uplighting or an eye bolt for downlighting. The 60-degree beam of light is offered in either elegant warm white or RGB which gives you a range colors accessible with a remote.

Tail, brake, and turn LED light bulbs generally have two main base types: Bayonet and Wedge. When searching for a bulb, be sure to use our visual filter, which will show which bulbs have your required base. Both wedge and bayonet bulbs are available with either single or double contact points and can serve either a single function or dual function.