Millingmachinelights

The addition of the mechanical arm to the work light makes the ML2 great for applications where the light needs to be redirected from time to time. The light is easy to move but will stay in place once it is positioned. These are often used as milling machine lights as well as workstation and workbench lighting.

Use of the latest LED technology ensures the optimisation of power consumption is kept to a minimum, therefore the operating temperature is lower, thus improving the life of the LED module which is calculated to be greater than 60,000 hours.

Industrialmachinelights

The fixture operates between 2.8 – 6.6 amps which can be powered by either an IGBT type CCR, Ferroresonant or thyristor unit powering the airfield ground lighting (AGL) series circuit. The fixture is fully dimmable and follows the response curve of tungsten halogen lights as detailed in engineering brief 67 outlined in the Advisory Circular (AC) FAA 150/5345-53.

A standard FAA L823 style 1 connector is used to connect the fixture to the isolating transformer ensuring a water tight connection is made. On certain applications an option for an additional power lead can be requested.

MachineWork Light

The ML1 is the ideal machine light. They are rugged, bright, and easy to adjust. They are constructed from anodized aluminum and are IP65-rated. This makes them corrosion-resistant and perfectly suited for washdown application. They are often used to light CNC machinery where cutting fluids are splashing.

The fixture when installed is adjustable in height from 250 – 350mm which includes the frangible coupling that it is mounted on.

The FX862C & FX862CW, Elevated runway edge light L-862C(L), is part of a complete range of LED fixtures for runway and taxiway lighting systems. This application is high intensity, Bi-directional, uni-directional, Clear(white), Yellow, Red light source, suitable for CAT II/III operations. An omni directional optical array, Clear(white), can also be incorporated into the fixtures. This help provide lighting for circular guidance where required.

Lathe light

The fixture is compatible with existing circuits so there is no need to replace the constant current regulators (CCR), the isolating transformers, or field cables. However, we would recommend that the CCR is re tapped to match the circuit load ensureing the benefit of installing the fixtures are attained.

These high-powered LED lamps have an adjustable pivot that makes it easy to aim the light precisely where you need it. These lights are equipped with the latest LED technology making them efficient and long-lasting. The LEDs put out a very bright 830lm of evenly distributed white light. The IP65 rating makes these lights ideal for applications where liquids might be sprayed or splashed onto the light. This feature makes them work well as a milling machine light or CNC machine center light. These are available as both 24V and 120V work lights.

The ML2 task lights use the same head, LED, and lens as the ML1 led lights but have an adjustable mechanical arm built into the work light.

Designed to meet the harsh environment the fixtures will operation in a temperature range of -55 °C to +55°C (-67 °F to +131°F) and has an ingress protection of IP67 (IEC 69598-1)

LEDMachineLight

A ‘fail open’ monitoring facility is available which operates, should the LED array stop working with either an open, or short circuit condition. Use of LED light source eliminates filter replacement and colour shifts when viewed at various angles or at different CCR brilliancy settings.

By drawing on our world-wide experience in high-profile AGL lighting projects, atg airports can help you to overcome complex challenges and achieve programme targets.

ATG Airports is a leading global airfield lighting specialist offering design through to supply, installation or simply maintenance of an existing system. Get in touch to find out more about our range of products and services.

Two options of this product are available to accommodate the different runway widths. The FX862C is suitable for runways that are 45 meters in width and incorporates a 3.5 degrees toe angles while the FX862CW is designed for runways that are 60mts wide with a toe angle of 4.5 degrees.

We also carry a bracket that allows mounting these lights on a vertical surface. The ML-BR-1 workbench light bracket is perfect for mounting these lights to 80-20 or T-slot aluminum extrusion.