*To adjust the holster cant, you will need to remove Molle Loks first.  Adjust the cant by loosening the 5/8” and1/2” flathead screws for plate mount, set to your cant angle preference and then retighten the screws.  Reinstall Molle Loksfollowing the procedure above.

Slipperyfloor sign meaning

Polypropylene cone signs measure 380 x 200mm and are attached to the cone using velcro hook and loop tape.Sign only , cone sold separately.

Video instructions can be found HERE*To adjust the holster the holster cant, you will need to remove Molle Loks first.  Adjust the cant by loosening the 5/8” and 1/2” flat head screws for plate mount, set to your cant angle preference and then retighten the screws.  ReinstallMolle Loks following the procedure above.

Wetfloor sign meaning

This type of sign should be placed in a position that is clearly visible for people to see. More than one sign may be needed if people can approach the area from different angles.

AS 1319 specifies that Warning Signs should be used to warn of a hazard or hazardous condition that is not likely to be life threatening. For all l...

Installation:1. Remove belt attachment w/1/8" allen wrench retaining Safariland threaded posts for step 4.2. Ensure 6 threaded posts are firmly installed into the T7 plate.3. Align T7 plate with holster, blocking toward holster.4. Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.5. Install 1/2" flat head screw and Safariland threaded post into bottom hole.6. Attach both Molle Loks to the plate with 6-5/16" flat head screws.

AS 1319 specifies that Warning Signs should be used to warn of a hazard or hazardous condition that is not likely to be life threatening. For all l...

Slippery When wetsign car

Slippery when wetsign meaning

Australian Standard 1319 indicates that a Warning Sign should be used when there is the risk of injury. A Slippery When Wet sign has black text on a yellow background, with a black triangle and a symbol. The symbol shows a figure slipping over.

Step 4: Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.Step 5: Install 1/2" flat head screw and Safariland threaded post into bottom hole.

Cone self stick labels measure 220 x 220mm. They can be attached to one or both sides of the cone lock in frame to provide additional information....

Safetysigns.com.au is Australian owned & operated. All our products are of a very high standard and comply with all applicable Australian Standards.