A membership to Weeklysafety.com comes at a very low price that never goes up no matter how many employees you have and no matter how many awesome safety topics you use. Included in your membership are hundreds of safety topics that you can use for your safety meetings, toolbox talks and safety moments.

Electricalhazards and control measures

Electrical cables and extension cords can easily become trip and fall hazards if not routed carefully. Keep all cords close to a wall and away from foot traffic to prevent tripping and cord damage.

Do not use an extension cord or a power strip with portable heaters or fans, which could cause cords to overheat and result in a fire. These devices should be plugged directly into a wall outlet.

Even when using a surge protector, make sure the electrical load is not too much for the circuit. Place power strips where there is plenty of air circulation to disperse heat. Consider charging battery-operated devices in another area.

Electrical HazardSign

what are the 5 mainelectricalhazards?

Fully insert the electrical cable plug into the outlet and never force a plug into an outlet if it does not fit. Do not plug or unplug anything while your hands are wet. Avoid overloading wall outlets. Do not plug in too many items that require power at once.

Extension cords should only be used on a temporary basis, they are not meant to be a permanent solution to a shortage of electrical outlets. Do not use indoor extension cords on outdoor projects. Do not use multiple extension cords connected together, use a longer extension cord instead. Store extension cords indoors when not in use.

Electricalsafety

Tasers, Stun Guns, and Electro-Shock Weapons (Conducted Electrical Weapons) must be transported in a manner that renders the device inoperable from accidental discharge. Some of these devices are manufactured with lithium batteries.

Weeklysafety.com is giving away 10 free safety topics, no credit card required! Take advantage and grab your free set of safety meeting topics today by clicking the button below.

Regularly inspect electrical cables to ensure they are not frayed, cracked or otherwise damaged. Damaged wires and cables can cause electric shocks and present a fire hazard. Any electrical cables, power cords or extension cords that are damaged, or are not functioning properly, should be removed from service immediately. This includes any electrical cords that are frayed or have exposed wires, even if they still seem to be working.

Electricalhazards examples

The high volume of electrical equipment in a typical office work environment can expose workers to serious electrical hazards, including shocks, burns and fire.

Electricalcondition example

Take a look at our website to learn more about everything that comes with a Weeklysafety.com membership. Click below to learn more today!

Secure .gov websites use HTTPS A lock ( LockA locked padlock ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Electricalhazards PDF

In the office, electrical safety at work is important. Electrical incidents and injuries that occur in an office environment are usually the result of faulty or defective equipment, unsafe installation, or misuse of equipment like extension cords, power strips and surge protectors.

Overloaded power strips and wall outlets are the most common electrical hazards in any office. Electrical circuits that are overloaded pose both an electrocution hazard and a fire hazard. Overusing an outlet can lead to overheating or a power shortage. If you must use a power strip, use a high-quality product from a reputable retailer. Low-quality or counterfeit power strips may contain wiring that isn't adequate to carry the load.

Keep all non-critical electrical items unplugged until you need to use them. Never remove the grounding pin on an electrical cord or extension cord plug to try to fit it into a two-prong outlet. When unplugging any device, power strip or extension cord from a power outlet, make sure to firmly pull the plug out of the outlet and never yank on the cord to attempt to pull the plug out.

Any flexible cord may be damaged by activities on the job, by door or window edges, by staples or fastenings, by abrasion from adjacent materials, or simply by aging. If the electrical conductors become exposed, there is a danger of shocks, burns, or fire. Do not bind, kink or knot electrical cords. Never run power cords under rugs or where chairs can roll over them. Do not run electrical cords through high-traffic areas, under carpets, across doorways or through windows. Do not secure any power cables to surfaces with staples or nails.

Official websites use .gov A .gov website belongs to an official government organization in the United States.